Error 52.0 - HP LaserJet P3005 Printer

lashes 52 and 54 ,you do mean flashes ? What flashes ? Check engine light doesn't flash codes .

The HP Printer error 52 indicates with scanner. When you see the HP printer error code 52, then follow the steps:

·Turn off the printer

·Wait for 30 seconds and then turn on the printer

·In case the 52 error is still coming up on the printer, then make sure that the Flatbed scanner assembly is replaced

·In case the error is still being shown, the Scanner/Laser assembly may also require replacement.

Find the more HP printer error codes and their solutions. If you need any help to fix the issue contact HP Printer experts.

52 error is scanner related not formatter. HP has had issues with some serial number ranges of this printer having bad scanners which they will replace. You should contact HP regarding this problem.

Sir/Madam

Unfortunately there's no troubleshoot with a 52 error. As it implies it's usually the scanner bad. It sits up top- under the top cover. It connects to the Formatted Board on the left side. and there's 2 connector s at the scanner itself.

So if Your HP Printer is Under warranty ( 12 Months ) Then I Suggest You Go To Official authorized HP shop for your HP Printer Problem and Troubleshoot or Go To Official HP Printer Website To Update HP Printer Software and Driver,Or You Update It From Official Below URL Link:

http://h30499.www3.hp.com/t5/Printers-LaserJet/HP-Laserjet-P2055d-error-message-quot-52-Scanner-Error-Turn-off/m-p/5905671#M207987
or
http://h30499.www3.hp.com/t5/Printers-LaserJet/HP-Laserjet-P2055d-error-message-quot-52-Scanner-Error-Turn-off/m-p/5905671#M207987

Or
In Case You Having Still Problem Then Follow Us On:




HP Printer Support

I believe it means

"no signal from the motor tachometric generato"

Which means Tachometer (tacho) coil on the motor may be faulty. This coil reads a magnet as the motor turns to detect the speed that the motor is spinning at and this in turn allows the electronic controller to set the motor to revolve at different speeds for the various program options.

52 is an internal scanner hardware error.
Unplug printer, wait 30 seconds, plug it in and power up.
Problem still there...make sure printer is plugged into wall outlet, not surge protector.
If error persists you will have to get the laser/scanner assembly replaced.
We arn't talking about the scanner/copier assembly at the top of the printer. This is the internal laser/scanner that is used for all your printing.

Hi,

52.x PRINTER ERROR alternates with To continue turn off then on Possible printer control panel error messages 52.0 PRINTER ERROR 52.1 PRINTER ERROR 52.2 PRINTER ERROR Description A temporary printing error occurred. The x can equal one of the following: 0 = Scanner error 1 = Scanner startup error 2 = Scanner rotation error This error can also indicate a problem with the shutter tab on the print cartridge. Action

1. Turn the printer power off, and then turn on the printer power.
2. If the message persists, check the print cartridge for damage.
   1. Verify if the shutter tab on the cartridge is broken or damaged. click on the below link. Shutter tab on the print cartridge
      
3. 1 - Shutter Tab
4. Replace the cartridge if damaged.

If the message continues to persist, then download the printer software based on operating system and reinstall.

HP Laser-Jet 2300d Printer Software


Regards
Chittaranjan

error code 52 on ricoh ft3213, that's mean heating element burn out , such as heater lamp, thermister , thermo fuse.

I think this will have to do with Hardware issues in terms of the "52 scanner error". According to the service manual, this has nothing to do with the ADF, but has to do with the Laser Scanner. The cable to the laser scanner is bad or the laser scanner itself is broken. If the cable is ok, then the Laser Scanner Assembly part number is RM1-0171. I think you could find it if you google it.