Dear Davidivory1, Thank you very much for your reply. You are right, I need a driver for my cameraDear Davidivory1,
Thank you very much for your reply.
You are right, I need a driver for my camera
You can't post conmments that contain an email address.
Re: How to find a software to be able to connect my...
You do not need software if you have Windows, it's built-in ready under the windows acc files, you may however mean you need driver so camera is seen by windows, sorry not sure.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
-turn on and switch your camcorder to playback mode and make sure that the tape is totally rewounded.(you're going to stream the video from the cam to pc using a supplied software or a thirdparty software like windows movie maker)
-connect your camcorder to your pc and you have to use a dv cable(4 pin to 4 pin or 4 pin to 6 pin type) the first end is a 4 pin which will be connected to your camcorder and the other end depends on what type of dv port you have in your computer(4 pin or 6 pin) Use the optional CV-150F (4 pin-4 pin) or CV-250F (4 pin-6 pin) DV Cable. the dv port on your camcorder is on the strap side on the upper part and its covered by a oval rubber
-once connected to the computer,ready your software(supplied or any other software that could record streamed videos ie: windows movie maker.
-play video from the camcorder then hit the record button from software( you're basically recording the videos from the camcorder live to your pc :)
Are you connecting using USB or Firewire? Unfortunately there are no USB Windows Vista drivers for your particular camcorder but using a Firewire(i.link) Cable should work.
For further reference here is the support site for your camera.
Camcorder Support Site
that's about as close as i can get to that model number... read the information on the page... there is a link to the software update and that may fix the problem you are having
well the camera should have had a d with it, if you have lost it the pogram for the camcorder is
image mixer 3
but before ou do that you have to finalise the disc
First check whether you have a DV port in your desktop, in case you dont have it, buy a IEEE1394 firewire card and install it on your mother board in one of the PCI slots. As soon as you restart your system the system will recognize your new firewire card, then connect the camera and pc through a fire wire card. As soon as you put the power button of camera ON the system will recognize your camera. Then using any video editing software you can download.
Dear Davidivory1,
Thank you very much for your reply.
You are right, I need a driver for my camera
×