Phase linear UV 10 Multimedia player.

Try www.mobileinformationlabs.com

wiring pin layout ginseng UV chan DVD iPod USB navigator and Bluetooth ready he's being good receiver 7 inch TFT 1200

the green camera wire on the back of the unit needs to be hooked into the reverse lights,

laser is bad
take it to a local electronics repair shop

Most all yellow wires for radio's are for memory you need to connect the yellow wire to a live 12volt all the time and the red to get 12volts when key is turned on

You need to hook up the pink wire to a power wire. I myself have a switch in my cig outlet (which ran blue lights i had inside my car) running it so if i ever got pulled over i just pull out the switch and they cant prove i was playing a movie.

the cd doesn't go inside.Everything else works. I don't know what's the problem

You will have wires of 7 colours. Solder it as per the data below...

White 7
Red 6
Black 10
Yellow 9
Blue 12
Green 1
Brown 13

The pins are numbered as follows

4 3 2 1
8 7 6 5
12 11 10 9
13

It should have a blue wire from the harness on the back of the player for turning on the amp, it may also be labeled "antenna" or "power antenna" or "P con". That is the one to run to the remote turn on of the amp.

Theres a wiring harness on ebay for it.