Questions & Answers for: assign a line

Ad

Question about 1872 Corded Phone

1 Answer

...assign an announcement to a specific phone line do the following: 1) Record your announcement message for a, b, c, ao, etc. as documented 2) Press program 3) Keep pressing the feature button until ...

Ad

Question about Prostar DCS-24B-LCD Corded Phone

1 Answer

...LINE AND WILL NOT LET ME GO ANY FURTHER MMC 606 assigns Speed Dial Blocks to the System and Individual phones. You need to verify if all blocks are used or assign a block ( 10 entries per block ...

Ad

Question about KX-T7633 Corded Phone

1 Answer

line not assigned HELP! In trying to reset my phone system, now when I pick up the handset the display says "line not assigned" and all I get through he handset is a busy tone. I can not get an ...

Question about KX-T7633 Corded Phone

1 Answer

LINE NOT ASSIGNED LINE 3 & 4 WHEN PRESSED - "LINE NOT ASSIGNED" HOW DO YOU FIX? Since, by default, you have either 4 or 8 lines minimum, do they appear on other phones and is there anything on the ...

Question about Corded Phone avaparp18d

1 Answer

assign the line to the first available button with lights, press [Next Data] until the display reads: Line Assignment 15 L01 1 Assigned 1 Assigned is the factory setting. ■ If you want to remove

assign to the direct department calling feature. To Program: 1. Dial 54. ?STA/LINE CONFIG.? 2. Dial 1 ?DIRECT RING? ?OR? Dial 2. ?DELAY RING? NOTE: For no station ringing, skip step 3 and make no line

Question about Lucent MLS-12D Phone

1 Answer

...twice the display should say system programming enter in "#301" the display should say line assignment and station: enter in the station you want to program the line on. the display will then ...

Question about ATT-974 Corded Phone

2 Answers

...assign one in programming it will stop. The above answer solves a different problem, but not the Line Status Indicator lights. To program out the additional lines: Press "Program", *, # then press 2, ...

...and when I select 9 for an outside line I get the engaged signal and message "CO Not Assigned". Any help would be gratefully received. Damian Did you not assign a speed dial CO buttton to an ...

Question about Kx-tda100 Kx-tda100 Digital Hybrid Ip-pbx Mai

1 Answer

Line not assigned I have three CO Line. line 1 can incoming call and outgoing call and line 2 & 3 can incoming call but can't outgoing call. when i press on CO Line 2 & 3 Button it show Line not ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Lands Phones Experts

Cindy Wells

Level 3 Expert

6136 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

k24674

Level 3 Expert

8091 Answers

Are you a Lands Phones Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...