Jensen Car Audio & Video - Recent Questions, Troubleshooting & Support


I used to own Jensen cd player for a while but I can't remember the solution of loop loading. Check Jensen cd-players manuals http://jensen.manymanuals.com/cd-players

Jensen Car Audio... • Answered on Nov 21, 2020


There is always a chance that you "bricked" the unit with the update. IT happens. When you get to the cross hairs you are supposed to hold your finger in the middle till it asks for the next step. IF it wont go to this, then can you retry the whole process over again. If not you have bricked it and it has to be sent in for reflash

Jensen Car Audio... • Answered on Nov 10, 2020


In the back of the set you should find a small 'spade' type fuse, replace with Fuse: 15-amp, mini ATM type There is a fuse holder in on the yellow wire on the wiring harness, pull out the unit and replace fuse. User manual: http://www.jensenmobile.com/docs/common/UV10/UV10_OM.pdf Wiring diagram http://www.manualslib.com/manual/674477/Jensen-Uv10.html?page=4#manual Good luck.

Jensen Car Audio... • Answered on Aug 06, 2020


I just purchased the VX7020 and went to Settings-Language-typed in 5,4,3,2,1,0 but the menu never came up. Any ideas?

Jensen Car Audio... • Answered on May 20, 2020


Try the following which i managed to get from POWER ACOUSTIK technical support:

Multi-region for PTID4006T, 406T, 4005, 405, 8006T, 8004, 4003, 5000, 5800, 5300, 530.

1. Turn the unit on and insert a DVD disc. The unit will display LOADING.

2. While the DVD player is LOADING press the following keys:
SET-UP, then press 0, 0, 0, 0 key (0 four times), then ARROW DOWN key (to change the zone to region all 0), then BAND/ENTER key and SET-UP

3. To finish the procedure, push the EJECT key. The disc will eject... Wait and the DVD disc will re-load and play.

Jensen VM9510... • Answered on May 19, 2020


This info is on the bottom of it.

Jensen Car Audio... • Answered on Mar 15, 2020


Ground - negative
12v positive - switchable positive (for example, on when ignition is on, usually connected to accessory side on ignition switch)
auto ant - connected to your electric antenna or to turn on external amplifier.
Memory - connected to always on positive (to keep all your stereo presets )

Jensen Car Audio... • Answered on Feb 11, 2020


6ya is a GIANT RIPOFF!! THEY'VE GOT NOTHING!!! OTHER THAN A WAY TO TAKE YOUR MONEY!!!

SCREW 6YA!!!

Jensen Xa 3022lx... • Answered on Oct 31, 2019


Sounds to be defective. All white is not normal under any conditions.

Jensen VM9511TS... • Answered on Oct 07, 2019


YOU HAVE TO GO INTO THE MENU SETTING

Jensen Car Audio... • Answered on Sep 12, 2019


If you remove the clamp, there will be a part number on it. Post the numbers on the transistor and we'll go from there.

Jensen LXA300... • Answered on Aug 16, 2019

Not finding what you are looking for?
Jensen Logo

2,049 questions posted

Ask a Question

Usually answered in minutes!

Top Jensen Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5023 Answers

The Knight
The Knight

Level 3 Expert

76584 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1189 Answers

Are you a Jensen Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...