Question about Jensen Iso-Max Stereo Line Output Isolator 1 to 1 Ratio Car Audio Amplifier
I have a 2002 ford focus, it has factory am/fm cd stereo in it. All of a sudden it looses the fm reception, staticy. It has fm and fm 1 an 2, have tried both and it does the same thing. Any ideas. Thanks Phil
Common fault but as others have suggested, check aerial plug. It does fall out, speed humps vibration,cause it to come out of it's socket.If not this, try a seperate aerial such as a piece of wire or a small screw driver blade in the hole. Press search and see if radio finds a station and locks on.If it does then you know you have an aerial problem and your radio unit is ok. Sadly, if no luck and no result then the only answer is to relpace the unit as it is not servicable.These can be found at some car breakers but take your car and make sure that you buy a tried and tested unit with its pin No. Typical costs are £30 with casette and £70 for cd player.
However because there are so many different types of socket and plug arrangments on these units and they all look alike , don't be tempted to part with any cash until you have got the correct one that fits your car and it works. If does and you have its pin, it will have to be entered to make it work and you have made a written note of it in your Ford hand book , then pay the man. Good luck From been there and have the tee shirt. J.R. Note. Halfords do a fitted alternative replacement for around £150 if no luck and you are prepared to spend that kund of money.
Posted on Feb 05, 2009
More than likely the antenna cable has come loose from the back of the unit. Head to Walmart and get a removal tool, pull the radio, and resecure it.
Posted on Mar 12, 2008
Take it back to the ford dealer and tell them we all know they are aware of the problem and we as a group will be seeking compensation.lets form an on-line petition any IT people please organise one and i will publicise this using the media if we can get enough support.
Posted on Feb 06, 2009
Tips for a great answer:
Usually answered in minutes!
Step 2: Please assign your manual to a product: