Error 0xc18a0105 - ink faillure for HP c7280-help

Here's a solution for that printer. Click here to view the solution. I am an HP employee. I do not represent HP on this site.

My HP Photosmart C7283 All-in-One printer has an error message: 0xc18a0105. Ink System Failure?

The error that you are having is a hardware issue, it means your printer is really of no use anymore. Believe me, there's no use going through troubleshooting for this one. Call HP and just Upgrade your printer. HP Printer Tech Support would be more than happy in giving you discounts and an extra year of warranty for $1.00.
Regarding the ink cartridges that you have note yet used. HP has an Ink Exchange Policy wherein you just have to send a request of exchange in one specific email address, and hp will exchange your cartridges for the new printer that you have.

my c7280 prints anything magenta in yellow meanwhile i have a lot of magenta ink and i have not mixed ink colours too...anything magenta prints yellow.
any help in resolving this pls?

are using a refilled cartridge?
if yes, install an actual brand new one.

are you using an official cartridge that you've had laying around for a while?
the cartridges expire so check if your cartridge has expired and replaced accordingly.

Best to refer you to HP support document:

HP Ink System Failure Error 0x...

I would un-install then re-install printer software ...then make sure the hp is set at default ....it probably wouldn't hurt to unplug the printer and let it sit fir a few minutes then once the software is loaded add your power first then with an active computer re-connect your usb and let the system find the printer . hope this helps !

Reset the printer. Thanks.

Does this help? The first part sounds the same.

Okay basically you either need a firmware update or you have air in your lines. If your unit is in warranty call HP for an exchange. If not the your kind of in a pickle. It will cost you to get the firmware update and there really isnt much to do for ISF. I do not have a purge command for that model. I am sorry.