Sprada Future Coffee Machine. I am looking for a schematic drawing or a service manual? Can anyone email me one, thanks

The error 8 service tel on a Sprada coffee machine usually indicates a problem with the temperature sensors or heating elements. Here are some troubleshooting steps you can try:

1. Turn off the machine and unplug it from the power source. Wait for a few minutes, then plug it back in and turn it on to see if the error message clears.
2. Check the water tank and make sure it is full. If the water level is low, the heating elements may not be able to function properly.
3. Check the temperature sensors and heating elements. You may need to open the machine and visually inspect these components or use a multimeter to test them for continuity.
4. If you are not comfortable with performing these checks or do not have experience working with coffee machines, it is recommended to contact a professional technician or the manufacturer for assistance.
5. If the problem persists, you may need to replace the faulty component or seek further technical support from the manufacturer.

suggest you contact Sprada for their technical help

COFFEE UNPLUGGED
Unit 3
Tuscan Place
138 Dytchley Road
Barbeque Downs
Kyalami

• +27 (0)10 001 0284 / +27 (0)11 440 4810
• Can also email to : [email protected]?subject=Enquiry from Coffee Unplugged Website: REPAIRS AND SERVICES

Contact Coffee Unplugged The Office Coffee Specialists South Africa

Hello,
you can obtain your manual by clicking on this site and following the links to download the manual http://www.retrevo.com/support/Bodum-3020-Granos-Coffee-Makers-manual/id/4610dj094/t/2/ or to bring you a step ahead to the following page click this link
http://www.retrevo.com/search/v2/jsp/mytrevo/myTrevo.jsp?page=man
this site is free to download any manual or instructions and if you have any problems obtaining it through this site message me back along with your email and I will send it to you from my email. Please also remember when our chat has fully concluded to rate how this service has helped in locating your manual for you. By doing this it allows me to continue helping others in similar situations in the future.
Thank you
Rick

Hello Kate,

Thanks so much for choosing my ad to help you. I am a Bunn Expert, so I can help you out here. Your problem appears to be a descaling issue. In other words needs to be cleaned, I am giving you the complete manual to download in pdf format for everything you need to completely maintain your machine and to trouble shoot any future problems as well. It will tell you step by step how to clean your machine as well as parts if needed and the schematics of the machine.

http://www.bunn.com/pdfs/commercial/manuals/10053.0000.pdf
If you found this was helpful and this had solved your problem, some nice words with a nice rating will be appreciated. Thanks again, Mike

Hi,

Please find the manual in the bellow link. Its in pdf format and can be downloaded .

http://www.saeco-usa.com/download/pdf/manuals/royal-coffee-bar_en.pdf

Let us know if you have something more to know else accept the suggestion.
Thank You for contacting Fixya.com

I have no clue about this product, but at the terminal board how many
wires come from machine to the board,or just wires coming from machine. A 220v, should have 2 hot, neutral,gr, so 4 wires. Depending
on what it looks like, the wires come from machine to a board or just wires.then the colors of those wires.

You should send them an email asking for help or schematic.
I posted there website below. Sorry could not help further.

http://www.faema.net/site/index.html

If anyone have service manual or any kind of electrical drawings of this Franke Ecolino Coffee machine please send to
[email protected]

All you have to do is go to pasonic.com and copy it right off line.

scott iam in need of one too would you PLEASE add me to your list Thanks so much