How to print page shown on my monitor with printing a whole book

when the down load opens up on the screen, in a small tool bar at the top of the pdf section there are areas that show page numbers , zoom in / out expand size etc the number of pages will be there shown as 1 /24, or 50,or 600 etc ( 1 / of the number of pages in the down load )
if you click on the scroll bar on the right of the page proper and scroll down , as you pass each page break it shows the next page number
if you scroll down the page you will come to a contents list and that will also show the number of sections in the manual and that will indicate how many pages you can expect
to reduce paper wastage from a normal house hold printer when you print from the printer logo in the bottom right of the page you get the printer up and where it says print all , change that to print odd pages ( or even pages ) or or print pages and this is where you put in the pages that you want printed -such as 1,3 5, 7 etc
when the print run is finished put the whole lot of printed pages turned around and back in the printer then print the page numbers that you missed on the first print run this will result in a booklet with printing on both sides of the page and reduce the number of sheets used in printing

when you press cont p, your printer should come up with a page that tells you all pages, only what is shown, or main, also you can tell it how many to print

A printer prints almost anything that is shown in a computer screen and it depend on what you're trying to print. If you want to print contents from a webpage, you have two options to chose from. The first is of course the contents in the webpage that you want printed and the second option is to print the whole webpage. If you want to print only the contents in a web page, e.g. an article or photo, you have to highlight the article or photo first then right-click and select 'Print...'. It should print the article or photo only. But if you want to print the whole webpage, chances are that it only prints the 'skeleton' of the webpage and not the contents, hence the reason you have only the left part of the webpage printed. However, if you highlight the whole webpage and then right-click and select 'Print...' I am sure you will have the whole webpage printed. Cheers.

get the download up again
it should be a pdf version download and that will come up on the screen with page 1/ number of pages
use the printer icon on the pdf page, click on that a print page will come up
tick the pages section and go print pages 1,3,5,7 etc until that last page
click on the print tab after making sure you have sufficient paper in the printer
when finisher pick up the lot of printed pages and reverse and invert back into the printer
no click back on the pdf printer icon and in the pages to print type in 2,4,6,8 etc until the last page
go print and it will complete the book
I feel that the problem is that by only printing one page at a time , you are using the file printer and not the pdf icon printer

Find your printer (in the start menu//control panel//printers and faxes). Open your printer and find the print que. Highlight the document and right click pop down. Locate and select cancel.

Should do it.

--W/D--

please you got to printer preferences select it then show a manu you select color select print in color and print if you are not succed you change a color cartridge

Select the Page Layout tab, in the page setup group, select margins, The at the bottom, select custom margins. on the margins tab about 1/2 way down, select the down arrow next to Multipl epages and select 2 pages per sheet. Print a couple test pages and see if that is the setup you need.

Hi,
Click on File and Print :
select the page range or number here as shown below:-


Hope it ll suffice ur need
:-)

Hi rahul,

When you press print a print page setup page popup. You can set it up to always print in bw or just for that particular session.

anaanymous