20 Most Recent Lexmark X2500 All-In-One Printer Questions & Answers

Unplug your device and replug it after sometime. Now run Reginout scan and reset your machine. Hope it would help you. Thanks

defective cartdge , replace it

BINGO just refill my 36 and printing :) just place tape (2) on the bottom the outside points
ONLY THE ONE OUTSIDE BOTH SIDES :) :) :)
HP his something like this too. 2nd try BINGO IT WORK drill right hole place tape back over refill hole LOL

Take the disc to a friend and install onto a USB. Back to computer and install from the USB.This link might also help: https://www.google.com/search?q=How+can+I+install+OCR+if+computer+doens%27t+use+cd&ei=L0yZYPy9K4n0rQH3nYZ4&oq=How+can+I+install+OCR+if+computer+doens%27t+use+cd&gs_lcp=Cgdnd3Mtd2l6EAMyBwghEAoQoAEyBwghEAoQoAEyBwghEAoQoAEyBwghEAoQoAE6BwgAEEcQsAM6BggAEBYQHjoICCEQFhAdEB46BAghEBU6CgghEBYQChAdEB5QroQBWNzUAWC41gFoA3ACeAKAAccEiAHPM5IBDDAuMjAuNS4yLjEuMpgBAKABAaoBB2d3cy13aXrIAQjAAQE&sclient=gws-wiz&ved=0ahUKEwi8kYyWsr_wAhUJeisKHfeOAQ8Q4dUDCA4&uact=5

Its not an Issue with the Out of Ink Error: Please try the below mentioned steps and let me know what happens: It insists there is a Cartridge problem on the Printer............ In this Case take out the Paper from the Paper Feed Tray........ Unplug the Power Supply from the Printer.......... Remove both the Cartridges from the Printer.......... Now take a size 10 Envelope fold it so that it should become like a thin long strip........ Now Insert that Envelope on the left side corner of the Printer and move it from right to left and left to right as fast as u can for about 10 times.......... Now Insert the Ordinary Papers onto the Printer and insert both the catridges and Turn on the Printer...... Blinking Stopped...........Issue Resolved....... Still Blinking: Remove both the Cartridges take a Paper Towel turn the catridges direction so that u can see a Copper plate with small boxes on it....... Just wipe it twice or thrice with the Paper Towel.......... Now insert it and Power on the Printer and see whether the Lights are still blinking if it is still blinking...... Good Luck!!!!!

try deleting the print job from the computer that sent the job first. then see if you can delete the job in the printer.

is you machine hooked up and have internet then it might have gotten new firmware and if you are using generic cartridges this can happen. try oem lexmark cart.

Sometimes companies only support only the basic drivers. The OCR software is on the CD (s) that came with the printer. Suggestion. Try to order the original CD from Lexmark., or search Ebay for programs that have OCR capability. You can use OCR programs from other vendors as long as they are stand-a-lone programs. Just make sure you have the original disc so as not to infringe on copyright privileges.

Note: you can buy OCR programs. Check Ebay and Amazon. They are usually better that the programs that come on the OEM disk.

Cheers.

If you need lexmark customer support number 1877-778-8@9@6@9. We are always here with tech team for your help. For further Info Click On Me:https://goo.gl/hvj3MK

If you need Lexmark Printer Customer Service Phone Number 1877-778-8@[email protected] are always here with tech team for your help. For further Info Click On Me:https://goo.gl/hvj3MK

If you need Lexmark Printer Customer Service Phone Number 1877-778-8@9@[email protected] are always here with tech team for your help. For further Info Click On Me:https://goo.gl/hvj3MK