SOURCE: Brother Correctronic 50 typewriter
Dear Brother Customer,
Thank you for your recent inquiry regarding a manual for your Brother
product.
Currently we do not have a downloadable version for this manual and we
appreciate you bringing this to our attention.
This manual is currently available in hard copy. Please see price
information below:
Item: 593640011
Price: $6.11
S&H: $5.75 (Ground)
Sales tax will be added if applicable.
To place an order for any Brother products or accessories you may
call our toll free number 1-800-284-4357 or visit our website at
www.brothermall.com
For your convenience we accept all major credit cards- Visa, MasterCard,
American Express, or Discover.
You may also mail in a check or money order to the address below:
Brother International Corp
PO Box 341332
Bartlett, TN 38184
When placing an order by mail please include your name, address, contact
phone number and the items you wish to order.
Thank you for purchasing genuine Brother products and accessories.
We appreciate your business.
Consumer Sales Dept
www.brothermall.com
Brother International Corporation
SOURCE: Brother Correctronic 40 Not striking
You’re right Brother authorized service centers are hard to come by and now that the one that I was working for went bankrupt I can’t buy parts any longer.
Let me see if I understand the problem. When you start typing it’s ok and as you continue typing it get’s lighter then it finally stops printing? If you let the machine sit like overnight it starts all over? If so what you need is a .20¢ rubber bumper used to lessen the hammer noise.
What happens is the rubber get’s sticky with the heat generated from use. I have tried to find a substitute (for the Brother part) and nothing I have found lasts very long. If you just remove the bumper the hammer makes a terrible racket (too noisy for more people), and I suspect if it were used without the bumper the hammer mechanism would rattle apart after a short time.
I know this can be repaired easily but not cheaply. The machine is old, it’s time to consider a replacement. Sorry!
SOURCE: Brother Correctronic 360 Word Processing Typewriter, how to remove case to clean keyboard contacts
very hard to do without breaking something. take to repair shop
SOURCE: brother typewriter correctronic gx-6750...prints
Make certain the printwheel is latched fully into position. Observe the hammer movement while typing slowly NnNnNn. If the hammer does not come to rest at the same position every time the hammer cams are at fault. Make sure there is nothing interfering with the printwheel movement (like the correction tape or ribbon)
112 views
Usually answered in minutes!
×