Why wont the ink now show on page? i have all new ink cartridges and cleaned everything. Please help??? confused

Try to do the Deep Clean Printhead function on your printer to force ink through the nozzles and clean possible clogs and dirt.

Hi

check cartridges expire date
run a few clean cyclus from your printers menu
If the problem insist replace cartridges

ps. vote us to keep us alive

quite often inkjet heads will dry up and clog. try a clean heads sequence in the printer properties panel. do this until it prints the clean nozzle page properly. If the ink cartridges have the print head attached to them (some dont) you can dab them on a paper towel with windex or vinegar until they show a nice clean line when dabbed. if you cant get the print heads out , then you just need to continue running the clean nozzel application until it prints the test nozzel job properly. This is the reason I will not buy any more inkjet printers. only Toner based machines. cheers.

I got disconnected.. can you end session and connect back to me?

Well due to some problem in cartridge you would be facing this problem.however you can do try this.

Please clean your cartridge once again with some spirit.

Fix it well in the printer afterward.

Than use normal paper and print in color.

If than also it does not work that means the bar-code of the cartridge has problem in it so the printer is unable to read that code, so for that you need to change the whole cartridge.

Or if your printer had valid in warranty period and it still in that period just give it to a service center.

If you still had any confusion regarding the same problem or nay other please do reply.

Naiven.

If the printer has been unused for a considerable time the cartridges may have become blocked with dried ink.

Remove the cartridge(s). Take a slightly dampened cotton bud or piece of kitchen paper and carefully wipe the copper coloured surface on the cartridge(s). Then wipe with a dry piece of kitchen paper.

Re-insert the cartridge(s) and perform the print head cleaning function in your printer control panel.

Now try printing.

I get this problem when I used re-filled cartridges, but take no notice until the ink fails.

Fix ink cartridge
I had same problem. I must have ran the clean cycle more than 30-50 times over a period of days. That never made any difference. I was about to toss the whole thing but figured I would try one more thing. If it didn't work I would be in no worse shape. Here is what I did.
Took an almost empty black cartridge and inject a lot of 100% Acetone to dilute ink. Left some black in it since I didn't want to think it was empty. Inserted this cartridge and ran the cleaning a few time. IT WORKED. I used my word processor program and filled a page with large bold font characters and printed a page or two. Each page cleared more nozzles. After doing this cleaning/printing a number of time, I put in the full good cartridge. Ran the cleaning a few time to eject any of the Acetone diluted ink. Ran the printed page a few time to remove more of the diluted ink.
Everything seems to work now.

illustrate on how to replace the ink cartridge on printer

I would advise running a group of upto 9 cleaning cycles - if you need the instructions on this please go to the Epson download page for manuals