Hp laserjet m1132 mfp wont pickup papers

Hi, the error E0 is for a paper jam, please make sure your laserjet M1132 paper tray is not to full. You can also do a power reset by..... 1) disconnecting the power cable from the back of the printer........ 2) disconnect the power cable from the wall outlet. 3) Wait up to 10 seconds and reconnect the power cable back to the wall outlet first, followed by the back of the printer. 4) Turn On the printer again.

Connect your printer directly to a wall outlet. (don't use a power hub or a surge protector)
??Here is a screen grab from the manual. If you need the who manual as PDF replay. Or if you have it, please read pages 189-210+.

Check ur scanner cable nd scanner motor

Albert,

This means that the paper try you're' trying to print from is empty. or at least the printer thinks it is. Can you confirm if there's paper in the tray?

http://www.printertechs.com/printer-troubleshooting/hp-error-codes

visit abovw site

Replace formatter.

i have paper and ink but mu photocopy can make anything can't laod any paper so tell me the solution

The paper is jam... make sure door is fully closed...

hp laserjet m1132 mfp errer E3

Replace with professionally remanufactured toner... it works better... or increase the resolution if you are copying...

I have refilled my HP LaserJet M1132 MFP toner and the print quality does not look good. It is very faint and if I try to increase the contrast, it is not readable. Please advice