Oki printer error codes 120714 - Oki Electric Industry Office Equipment & Supplies

Hi,

I believe that this is a high-temperature error. so, you might need to move the printer to a cooler room or lower the temperature of the room that the printer is in.

Thank you.

Please confirm the model and error code. I have checked the technical manual for the B410d and there is no reference to error 131.

some solution ? i have the same problem :(

printer oki b411dn put out of the balcony, unsatisfied by his work, too many error codes, to lost time, to failed

Error code: 173
This error code means that the fuser temperature is low. You need to replace either the fuser or the thermistor inside the fuser.

you can some error code at manual
if you did not have manual you can download amanual at
http://www.german-parts.de/oki_manual/paperjam/stau_mb400_series.pdf
at that manual you can find some error code and how to fix it

I have an error code L4-02 with Oki B8300. what is the solution?

That is a fuser code. Turn off and take out fuser(the part that gets hot) and inspect it. Put it back in and turn back on. If code is still there replace fuser.

Its a Thermal error. the code is Error 020 and its a problem with the main board on the printer. costly to repair if not under warranty

No reset need to fix fault then clears...

Replace Toner Cartridges with Gen OKI new ones... are you using non oki product? Cause Toner carts, thats where I would start looking cause the error is the machine not receiving correct information from a little chip built into the toner cartridges to allow operation to begin.