20 Most Recent OKI C8800dn Led Printer Questions & Answers

Error code: 173
This error code means that the fuser temperature is low. You need to replace either the fuser or the thermistor inside the fuser.

OKI C8800dn Led... | Answered on May 27, 2011

0 Answers

What does Fatal Error 173 mean on an OKI C8800?

OKI C8800dn Led... | Posted on Apr 08, 2011 | Be the first to answer

1 Answer

Just installed the Second Paper

well probably the second tray hasn't been installed properly or the connector being used is faulty. the procedure is basically usually the same for most OKi printers.. please visit this guide here for proper installation steps of second tray.. if after these steps it doesn't work out, then double check your connector.

OKI C8800dn Led... | Answered on Nov 18, 2010

0 Answers

How do you reset the okidata c8800 drums from the

OKI C8800dn Led... | Posted on Oct 01, 2010 | Be the first to answer

0 Answers

How to reset drums in oki c8800

OKI C8800dn Led... | Posted on Apr 26, 2010 | Be the first to answer

1 Answer

I would like to reset the drum counter of my OKI 8800

You need to insert a 1/16A fuse into the drum and let printer blow it thus resetting the counter. Don't use fuses with the higher rate - they can easily blow your printer instead! Much more expencive that putchasing a new drum. By the way - 20k at continuous printing, meaning print jobs are as big as 100-200 pages each. The less pages per job the sooned drum life ends up.,

OKI C8800dn Led... | Answered on Sep 24, 2009

0 Answers

OkiData printers connected to 170x print server

OKI C Office... | Posted on Feb 14, 2018 | Be the first to answer

1 Answer

My Oki C310dn printer prints lines through everything.

You need to do s head clean.
This could take 2 or 3 goes but should fix it you will find head clean in the maintenance settings.
It eats the ink so only do as you need.
let me know how it goes.
Regards Craig

OKI C Office... | Answered on Feb 03, 2018

0 Answers

Need to know where the reset fuses are located for the fuser and the transfer belt on Oki c6050n

OKI C Office... | Posted on Dec 29, 2017 | Be the first to answer

1 Answer

OKI c6150 with error msg 002-fatal error. please, I need a quick answer. do not have time to scroll through pages of older posts

If you printer has an additional memory card fitted then remove it (powered off of course) and turn on and see what happens. If the fatal error is still there then with the age of the machine (getting on in years) it is better to replace it as the error refers to the cpu in the control board and that's expensive on older machines to replace.

OKI C Office... | Answered on Jun 21, 2016

2 Answers

Oki c6100 streaks on the back og a copy

replace
1 fuser unit or
2 transfer belt

OKI C Office... | Answered on Nov 16, 2015

0 Answers

Hi all i have a problem with an oki c9655 when i power on on the screen shows a message BRK INST EXECUTE has anyone come across this before??

OKI C Office... | Posted on Oct 28, 2015 | Be the first to answer

1 Answer

How to reset fuser life error

the best soloution is to replace the unit with a brand new one as reset fuses are difficult to work with on fuser units but if you search the internet you might be able to find a reset kit from alibaba or amazon

OKI C Office... | Answered on Oct 27, 2015

1 Answer