Error code C-D366 - Konica Minolta bizhub C250 All-In-One Laser Printer

AK Techno service is the best service center for repairing and service for all types and brands of washing machines.
For more visit our website. http://aktechnoservice.com/samsung-washing-machine-service-center-in-hyderabad

if its a Kenmore model then this message says that the button control board has lost sight of the main control board , but its been my experience that this maybe able to be reset and it may never come back or it will not reset and the control board will need replaced (50/50)


cycling power may reset this

C-D 370 = NVRAM Data multiple errors
C-D 366 = NVRAM Data error
C-D 251 = No JPEG board mounting at JPEG board mount setting

You need some serious firmware re-flash and maybe a new NVRAM chip which house certain counter info for the machine its like you BIO chip on a computer, and or Image control board $$$$$$$$$$$$ Firmware is only available to Konica Minolta Dealerships and KMBS tech, its not drivers but the operating system of the copier and companies protect that via secure servers.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

NVRAM kind like computers BIOS. Data multiple errors. Need a tech to come out and re-flash the copier firmware not the drivers. the firmware is only available thru a secure Konica Minolta server. or the NVRAM CHIP is bad worse case so is the board. And it is C-D370, C-D366, and C-D251 which deals with Image control board. it to mite require its firmware re-flashed.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Sir,
NVRAM kind like computers BIOS. Data multiple errors. Need a tech to come out and re-flash the copier firmware not the drivers. the firmware is only available thru a secure Konica Minolta server. or the NVRAM CHIP is bad worse case so is the board. And it is C-D370, C-D366, and C-D251 which deals with Image control board. it to mite require its firmware re-flashed.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Do You have an HDD on it? code that begins with c-Dxxx are HDD or Firmware

Unplug external USB devices and wait for sometime,now reset our machine and access in safe mode, run Reginout Scan.

I believe your problem is in the drum motor assembly part No is AD97-10579A. Samsung they know that problem it require a Technician to replace this part because you must adjust electronic and sometime mechnism as well. Depend which country you are it might cover under warranty even your CAM is out of warranty just check with Samsung in your area