David Hawley Posted on Oct 27, 2012

Need to know what wire goes to were..on a smith & jones modle 67841 compresser motor..p1 p2 t2 t3 t4 t5 t8..to what wire black white green

There is a green black and white wire..on my compresser..on the smith jnes compresser there is p1p2 t2 t3 t4 t5 t8..were do they go to witch wire to what

Anonymous Jun 19, 2013

Does anyone know which is the proper capacitor for this motor model 67841 smith + jones 1.5 hp motor....

1 Answer

Jonathan Wurdinger

Contributor 1 Answer
Posted on Jan 07, 2015

Jonathan Wurdinger

Contributor

Joined: Jan 07, 2015

Answers

Questions

Helped

5818

Points

Hey guys, this motor is reversible. I have it wired to turn clockwise(according to diagram),
green to ground;
L1 (black) to P1;
L2 (white) to T2-T4-T8;
P2-T3-T5 together .
When I plug it in, the motor turns counter clockwise and the on/off switch does not work. How do I fix?

5 Related Answers

John Prohaska

1378 Answers
Posted on Jun 14, 2009

SOURCE: Which wires goes to which post ? Just bought an

It does not matter. Just make sure it is set to the correct voltage your system supplies to it and that you put pne wire on each terminal as the diagram on the side of the motor will show you.

Anonymous

10865 Answers
Posted on May 06, 2009

SOURCE: Which wire goes to which post ? Intermatic T104R

The two wires are interchangeable.

Anonymous

999 Answers
Posted on Jun 17, 2009

SOURCE: wiring a 220v single phase motor and capacitor

Black and white are usually power. an ohmmeter will confirm. Brown are for capacitors. There is almost always a diagram on the motor someplace. Eric

John Prohaska

1378 Answers
Posted on Jul 12, 2009

SOURCE: I HAVE AO SMITH MOTOR BL6414 HOW DO I WIRER IT UP

The BL6414 motor is shaded pole and does not require a capacitor.

electronic & computer repair& servicre

12061 Answers
Posted on Mar 17, 2010

SOURCE: Spa Pump Wiring

please find below the info you require, these are the manuals of that motor.
www.aosmithmotors.com/WorkArea/linkit.aspx?LinkIdentifier...
http://docs.google.com/viewer?a=v&q=cache:UES1zbqm9RsJ:www.electricmotorwarehouse.com/PDF/pool_motor_manual.pdf+A.+O.+Smith+Centurion+spa+pump+wiring&hl=en&gl=nz&pid=bl&srcid=ADGEESjOtyQRC2zFUyytT20Lp6wwGkCA7O2f0td1OD0aHXNAYBSldfz5ZXJDP7QkilQXZ8oY2utdOs_5dbVem251azVkYspaP-d_mX0SA2ev208QE_pvSj4b7fxxNVSsRJo5brGfrzyU&sig=AHIEtbTLPNEwqISA51Ih8x8jFo9x4rqtSg

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1helpful

1answer

Trying to wire a single phase 1HP motor to a standard hot, neutral, ground plug. J10 Black ----] 2 White----] low volt line T4 Yellow---] P2 Brown----] T3 Orange---] T5 Red--------] P1 P

didnt specify to much --generic answer -- sounds like hooking up a heating or cooling unit black and white should be your line voltage use a meter to test your black and white line for 110v if motor is 110v the low voltage lines are control or switch lines that dont go to motor they usually go to a thermostat or transformer

Read full answer

May 04, 2017 • Cars & Trucks

0helpful

1answer

Wiring a smith and jones 1 hp electric motor for 220. The diagram is not very helpful. I have a red and black hot lead and a white neutral. Where do they all go? I want to make the motor go ccw.

Ok from what I read on the diagram take one lead to P1 cap of P2 T3 T8 and T2 are together and T4 and T5 are put to the second lead
If you want to change direction exchange T5 and T8

Read full answer

Feb 11, 2017 • Smith Pool & Spa

0helpful

2answers

Which is the right partner of T1? IS THE T7? OR THE T4/ OTHER T2.IS THE T8 OR THE T5?

One needs to know what the voltage and phase(1 or 3) the unit is and what the power supply is.

Read full answer

Apr 12, 2015 • Hobart H600 Stand Mixer

0helpful

1answer

I need ang diagram for hobart mixer 9 out wire T1/T2/T3 AND T4/T5/T6, T7/T8/T9 which is the right partner of t1/t2/t3???

Having 9 wires means it is a 3 phase motor.
For 220 to 240 Volts - L1, T1 and T7 go together. L2, T2 and T8 go together. L3, T3 and T9 go together. T4, T5 and T6 go together.

For 440 to 480 Volts - L1 and T1 go together. L2 and T2 go together. L3 and T3 go together. T4 and T7 go together. T5 and T8 go together. T6 and T9 go together.

Read full answer

Apr 12, 2015 • Hobart Food Mixers

0helpful

1answer

I have a Dayton Motor #6K773 I am not sure of how to wire it for 220. Motor specifications: Phase 1, 115/230 volts, 2 hp, rpm 3450. All wires are yellow labeled p1,p2,t2,t3,t4,t5,t8. High power diagram has...

Dayton 6K773AC
Line1 = P1
Line2 = T4, T5
T2, T3, T8 Cap Together
P2 Cap

Read full answer

Nov 02, 2013 • Air Tools & Compressors

0answers

Replacing a 220-volt motor on a boat lift with a Leeson A4C17H4H... and its SEVEN wires are all yellow (T8, T2, T3, P2, P1, T4, and T5) which I need to connect to FIVE wires coming in (green, red, orange,...

Read full answer

Be the first to answer Aug 16, 2013 • Leeson Reversible Electric Motor 3/4 HP

0helpful

1answer

I NEED TO REWIRE A DOERR LR22132 ELECTRIC

The green should be connected to the chassis, it is ground.
There should be a wiring diagram on it to tell you how to do this, but if not:

There may be T-leads on the motor labeled
P1, P2, T3,T4,T5,T8

P1-L1(black wire)
P2-cap/tape don't use.
T2,T3, and T5 wire nut together
T4,T-8 wire nut together with L2(white)

The power leads will be coming from your switch box on the compressor body itself. Don't wire the 220v directly to the motor, you replace the leads where the first motor was connected on the cutoff switch. There will be only 2 leading from the switch to the motor.

Read full answer

Mar 24, 2010 • Plumbing

4helpful

1answer

I have a doerr electric motor, lr22132 single phase 220v, 3/4 HP with wires t2, t3, t4, t5, t6, t7, t8 and earth, how do i hook up, any help would be great, paul

i have a doerr electric motor, lr22132 single phase 220v, 3/4 HP with wires t2, t3, t4, t5, t6, t7, t8 and earth, how do i hook up, any help would be great,

Read full answer

Nov 20, 2009 • Kitchen Appliances - Others

8helpful

1answer

Need wiring diagram for 3 phase electric motor

motor leads on a three phase are T1, T2, T3, T4, T5, T6, T7, T8, T9. for high voltage [480] L1 to T1, L2 to T2, L3 to T3, connect together and tape - T4-T7, T5-T8, T6-T9. For LOW voltage [240] L1 to T1 & T7 & tape, L2 to T2-T8 & tape, L3 to T3 & T9 & tape. T4-T5-T6 together and tape.

Read full answer

Oct 20, 2009 • Saws

0helpful

1answer

Hi I have a farm duty 1/2 hp dual voltage, single phase, capaciter electric motor. I simply want to attach a plug for 110. My problem is there are 9 wires colored and Labeled as follows Y/Black- P1 Br- P2...

there is normally a name plate on the inside of the cover that shows high and low voltage connections without that the connections could be a couple different ways. Have a look Im sure its there

Read full answer

Jan 21, 2009 • Heating & Cooling

Not finding what you are looking for?

View Most Popular

A O Smith Motors Centurion 1.5hp 115/230v Aluminum Keyed Motor

Pool & Spa

Trying to wire a single phase 1HP motor to a standard hot, neutral, ground plug. J10 Black ----] 2 White----] low volt line T4 Yellow---] P2 Brown----] T3 Orange---] T5 Red--------] P1 P

Cars & Trucks

5,828 views

Ask a Question

Usually answered in minutes!

Are you an AO Smith Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Have a manual for AO Smith A O Smith Motors Centurion 1.5hp 115/230v Aluminum Keyed Motor? Or just drag it here!

Related Topics:

Need to know what wire goes to were..on a smith & jones modle 67841 compresser motor..p1 p2 t2 t3 t4 t5 t8..to what wire black white green