At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
The liquid crystals in my screen broke when something was pressed against it while transporting it. Looking for a replacement screenThe liquid crystals in my screen broke when something was pressed against it while transporting it. Looking for a replacement screen
You can't post conmments that contain an email address.
You can find part on Ebay under cameras for parts or repairs. Look r717, but also look into m305, m307, m407, and m417 cameras. They all use the display screen.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hello Fabio, You can find the replacement LCD screen for Olympus FE210 here: http://www.pantallas.biz/epages/wwwpantallasbiz.sf/en_GB/?ObjectPath=/Shops/160419/Categories/Olympus
You may be able to fix it yourself if you can find a replacement screen, and you have some basic experience and are comfortable with electronics. Usually there's no soldering involved, with replacement merely requiring unplugging and reinserting the screens ribbon cable in it's connector. I usually search ebay for a broken camera with other problems that I can cannibalize. Here's some examples on LCD replacement:
dear mkmkmk,
The easiest way to get rid of the date time stamp with a broken lcd screen is to do a mual reset of the camera, which can be done by
1. turn of camera
2. remove memory card
3. remove battery and make sure the ac power cord is not connected.
4. you need to press the reset switch which is located above the battery slot. To do this you need to get a paper clip and straighten it and push the straighted end into reset switch until the switch is depressed.
5. reinsert the battery.
6. after you verify that the camera works without the optional memory card reinsert the memory card.
the factory setting default does not have the date/time stamp activated.
Hi:
I think you have broken (accidentaly with the fall) the cable with several wires that connect the LC display.
My real advice is that you take your camera to a store were they can give you direct support desmanteling the camera and replacing the cable or fixing it.
However, Zair already had a problem like yours and the best solutions was given by BowerR64. You can consult on the following page:
http://www.fixya.com/problems-solutions/t103443,p294056/Canon-PowerShot-G2-Digital-Camera.aspx
(just copy and paste on the address bar)
;)
Regards
The liquid crystals in my screen broke when something was pressed against it while transporting it. Looking for a replacement screen
×