When I try to print message says problem comunicating with the printer

Try to unplug your printer from your computer. Unplug and replug your printer into the power source to reset itself. When your printer turns on completely, reconnect to your computer. Try to print again. If problem continues, you may refer to these articles in the Lexmark website:
- Communication Not Available' Error Message and Print Job Stalls in Print Queue - No Communications Error When Trying to Print or Scan
I hope these help. Thanks.

It could be just a slight communication issue. Try to unplug your printer from your computer. Then unplug the printer from the power source. Replug after 10 seconds. When the printer turns on, replug it into your computer. Doing this usually fixes minor communication issues. If error continues, you may refer to this article on 'Communication Not Available' Error Message and Print Job Stalls in Print Queue for troubleshooting steps. You can also contact Lexmark technical support for additional assistance. Thanks.

check the connection configuration (if is com port, check speed, flow control and others)
Try to install locally with segull drivers (www.seagullscientific.com) if you need, reset to factory defult. print a test label from the driver. if is comunicate, is not printer problem, is connection problem with your software.

if the computer says printer off line then they are not comunicating try to reload driver

Hi !!

Try reinstalling driver of your printer.

Thanks

Most probably there is comunication problem between the printer and the computer. Have a look at the comunication cable, try another cable or reinstal the printer again. GOOD LUCK.

Good day.
Usually that happened once the printer was not set to default setting after it was installed.
To set to default, click start, choose printers and faxes, select the lexmak pinter, click file select default printer.

To test your printer if it print.
1. right click the printer icon
2. select properties
3. click print test page

Thanks.

Try changing de usb cable.
It works!

witch errorr messages comes up???

Make sure you install the printer drivers before connecting the printer. It also might be a cord or port problem-try a different cable and/or different usb port.