My lexmark x5470 does not turn on, and only a red light bright inside near the print injectors. Thank You.

If you are physically able and willing, carefully lift the printer and turn it upside down so the foreign object will freely fall out from the feeder. Shake it carefully, if needed. Thank you for choosing Lexmark.

Hi,
The problem may be due to a faulty printhead or maybe the ink is dry inside the cartridge. Try the following set of instructions this has helped me resolved several print quality problems.
http://bit.ly/9J3i7T

I would like to inform you that Lexmark X5470 is not a wireless printer. However, if you want it to use wireless then you should have a Lexmark N4050e 802.11g Wireless Print Server.

I solved my problem by powering off, which I knew would lose the faxes in memory. However, I decided to have the faxes re-sent. As soon as I get time, I will address this issue with Lexmark. It seems incomprehensible to me that Lexmark does not provide instructions on how to do this.

Thank you for your interest. This simple question does not warrant a team to figure out--it is a manufacturer's responsibility.

I have the same model (about a year old) but there are no lights visible on the back of my printer (neither red or green). Have you contacted the Lexmark tech advice website about this problem? They may take a few days to respond but there are numerous possibilities in trying to locate the fault (probably in the power circuitry) and it might have to take it to a repair shop to get it tested (if it is not under warranty).

Try this remove the cartridges and replace it back and turn on the printer this will print all the faxes stored.

You might have a little paper stuck inside your printer or just clean the pick-up roller with alcool and try it again.

the printer cartridges have the ink Blue (light blue), red (pink) and yellow (lime).I think your printer printing fine do not worry all the printer have same ink........If you have the problem with color on print outs :you this link ::

http://support.lexmark.com/cgi-perl/knowledgebase.cgi?ccs=229:1:0:549:0:0&framed=&docid=ENUS25128&relevance=1

what is it says, when is not printing?...in the first place, did you install your lexmark printer to your computer?..all of the printer have a cd driver, you must install that driver first, before you use your printer.

Fiend your solution direct from Lexmark. Here is your solution



http://www.lexmark.com/printer/prob676ijt65/solution
925