- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It is now 18 years old. There are sites like Driver Guide that will scan for hardware and drivers and update if they are available. Windows 10 has a huge library of drivers, so you should be able to force Win 10 to find them.
1) Right-click the specific application and click Properties. 2) Go to Compatibility tab, then check the box next to Run this program in compatibility mode for: 3) Select the version of Windows to use for your application in the drop-down box. 4) Click Apply and OK to save the change.
Sept 28, 2021
Make sure that the USB cable is not connected and install any generic or previous driver that may have been installed before installing the Lexmark driver. Note: you may need to reboot your computer after uninstalling the printer.
I hope this helps.
Cindy Wells (note the Lexmark files do not include any third-party software that may have been on the original CD.)
Try to troubleshoot compatibilty. Right click the program icon of print cd then click troubleshoot compatibility, click try recommended settings, click start the program, click yes to run the program, if it works save the setting. If it doesn't work try to download print cd version compatible with windows 7.
Sounds like you chose print to file for the port in the driver instead of what it should be set for. comm for serial cables. lpt1 for parallel, usb for usb. by having it set the way you do it is told to save the code. goto printers and faxes and right click on the zdesigner print driver and chose properties. then click the ports tab and chose the correct port.
Hi, Can you please post some details about your pc. I mean the hard disk and the version of windows you trying to install. if the hard disk is sata it may require the command line driver which old version of windows doesnt have. If this is the case then you have to slip stream your windows cd. download and include the drivers in the cd. it should pick it up. http://www.winsupersite.com/showcase/windowsxp_sp2_slipstream.asp go the above link. which can guide you how to slip stream windows cd and include newer version drivers in it. using this method you can even include your other drivers like graphics, sound etc into a windows cd. Hope it solve the problem you having with your pc
First, install "epson easyprint" from the epson website. Its found under drivers and support for your unit.
Then click ok on that error message about "driver dealing with..." After
you click ok on the message, you will get another window where you will
find a "manual print" button. Click on this manual print button and
this will take you to the next window where you have to select "A4 as
the paper size" and "CD/DVD as the paper type and paper path" . After
this, click print... it should start to print! This is just a
workaround until epson gets a patch for leopard for print