20 Most Recent Avaya Eurostyle 18D Corded Phone - Page 2 Questions & Answers

To mute the microphone while on a speakerphone call press the mic/ hfai button above the speaker button. To turn the mic back on press the mic key again.

No, whoever administers the voice mail will need to go into administration programming to reset the mailbox or mailbox password.

Partner ACS, any release
Changing the time on a Partner system must be done from extension # 10 or 11. 1. At station(Ext.10 or 11) press feature, 0, 0
2. Press the left intercom 2 times
3. Enter # 103
4. Enter the correct time in 24 hr. format, for example:
* to set the time for 09:00 A.M., enter 0900
* to set the time for 04:45 P.M., enter 1645
5. Press feature, 0, 0

You need to do Admin programming to tell the system to log the calls (#317 & #318)

Then you need to put a log button on a lighted button (Feature 23)

The clicker switch might be bad, you can get it repaired.

We need more information. Is the caller trying to leave a message? Are you sending someone in to check their messages?

Press Feature 00 (zero, zero) from station 10 or 11. Press left intercom button twice, press #103, and then enter time in military format (24 hr). Press feature 00 again. This is all done with the handset down.

What do you mean, "Set Intercom"? Program someones intercom on your button?
Feature00
press the button you want to program
press the LEFT intercom button and the 2 digit extension number
feature00

Without picking up the handset and from the phone connected to extension 10, press FEATURE the LIC (left intercom) twice and dial #101 Enter the date in MMDDYY format.

So you don't have to ask, the day of the week is #102 if needed (2.0 or earlier) with Sunday being 1, and the time is #103 in HHMM 24 hour format.

Press Feature 00 to exit programming.

Carl

Unfortunately you cannot toggle this feature.
On extension 10 or 11
Feature 00
Left Intercom, Left Intercom, Right Intercom
Enter extension number that you don't want to ring
hit the line key until display shows No ring
To do next extension : Right Intercom and enter next extension number.
Follow same procedure for all extensions.
Feature 00 to exit programming

Let us know if you need additional assistance.
Cheers

Changing the Greeting on a Partner Voicemail.

Here. If you dont know the passwords, we are in trouble.

Which password? the system admin password? OR a user password

Unfortunatly you will have to contact your vendor. They should be able to fix it or send you a new one if it is on the warranty. Avaya gives 1 year warranty on all units.

http://dstech1.com/changing-time-on-a-partner/

Here you go.

Click there
|
|
V

From extension 10 or 11
feature 00
left intercom
left intercom
#103
enter time
feature 00 to exit programming

Shape of phone and buttons...both work the same.

Feature 23 will get into your call log. To program it to a button on the phone (one with a light is required):
Press Feature 00, press button to be programmed, press Feature 23, press Feature 00

If the voicemail you want to use is Verizons, it will NOT light the light on your phone.

For that to happen, you would need a voicemail through the phone system

This must be done at extension 10 or 11:

Press Feature and dial zero zero

Press the left intercom button twice


To set the time, press the pound (#) key and dial 103. Enter the correct time using a 24-hour clock (if it's afternoon, add 12 to the hour...i.e. 3pm is 1500)


To set the date, press the pound key and dial 101. Enter the correct date using the format MMDDYY (two digit month, two digit day, two digit year).


Press Feature and dial zero zero to save your changes.