20 Most Recent Jensen JMP-33 Computer Speakers Questions & Answers

if your computer came with a motherboard disc the sound drivers could be on it click start control panel administrive tools computer management device manager scroll to sound,video and game controllers you might see a yellow question mark? Right click to reinstall drivers or uninstall click start control panel sounds and audio,volume,advanced,speakers make sure you have selected the (((appropriate speakers))) also audio you will find 3 drop down lists make sure you have the correct settings there also click start control panel sounds and audio devices select advanced there might be a tick in the mute box untick it click start control panel sounds and audio devices you can adjust the volume there also select speaker volume you can change your settings there you can also tick in the box place icon in taskbar if his does not fix the problem

have you tried this control panel sounds and audio,volume,advanced,speakers select the appropriate speakers from the drop down list or navigate to the device manager scroll to system devices + to expand,system speaker right click properties then select use this device (enable) also you might check the speakers plug/outlet is usually at the back of the computer you will have to open up the computer to check the lead attached to the rear of the input plug make sure the connection is good try cleaning your computer of dust using a fine air blower from a compressor making VERY sure that there is no MOISTURE in the air line specifically around the sound card and the CPU central processing unit dust causes static to build up in a computer make sure you have an earth ******** before touching any parts inside your computer hope this helps

Make sure that the speakers are getting power.

Get another speaker, head phones or iPod headset and plug in. See if you get sound then, If everything fails this would indicate a problem with the computer or computer settings.

If other speaskers or headset works this would indicate a problem with the JPM-33 speakser.

This looks like a fragmented answer. Are you hooking up speakers? Go to the Shack, get 22 gage wire with what ever type ends you need ...

To set the time on a Jensen JCR-425 clock radio:

1. Press and hold the "Time Set" button until the display flashes.
2. Press the "Hour" and "Minute" buttons to adjust the time.
3. Press "Time Set" again to confirm.

Hi, Please hold down the open/close button instead of just pressing it. Then you can press the lid while this is happening. I think you might already suspect this, but it sounds like the hook that connects to a portion of the lid isn't unhooken during the button press. Friction might be a cause or the hook-movement might not be functioning as smoothly due to other factors. If the issue continues, we might have to consult Jensen on a potential repair/replacement of the item as well.

radio has a serial number your vehicle has a vin ----

I'd contact the manufacture and tell them there wasn't a pump in the box, they should send you one verses having to purchase it.

Check the belt is fitted correctly. If it is not it will affect the speed. If the speed is slow on both 45 and 33 rpm, then it could be the motor. Sometimes there are speed presetts at the none shaft end of the motor. If it doesn't look like the motor has any built in electronics in it, then look to the turntable power supply look for faults in that.

Probably incompatibility

The two units are incompatible.

To set stations, press set button on far right then search station then press number station is to be set.

Hi Tom- I found this link regarding Jensen CS 315 speaker specs. Click on "See More" for further information. https://picclick.com/JENSEN-CS-315-3-WAY-MONITOR-STEREO-SPEAKERS-8-184010428853.html Hope this helps.

Free manual online: https://www.manualslib.com/manual/1362397/Jensen-Jcr-315.html

Bill, Sorry that I have to be so general in answering this question. If there is a burnt smell associated with the occurrence of the problem, then that would point to a fault most likely in the audio output circuit. If the unit blows a fuse, then I tend to think that it is in the power supply of the internal amplifier. Either way, service is needed for the unit. It is best to disconnect the unit from your sound system and try to find someone qualified for this repair.

Does your Jensen have the AUX inputs on the back or front? You would need to find a Satelite radio with the Outputs that will plug into the AUX Inputs. Some radios have a special input connections for Satelite radios, so check the Manual.

https://www.manualslib.com/manual/560570/Jensen-Jcr-208.html