20 Most Recent
Hotpoint Ariston AW125 Front Load Washer - Page 3 Questions & Answers
Replace bearing Hotpoint aqualtis aqd970f 69 eu
It is possible to replace just the bearing on your Hotpoint Aqualtis AQD970F 69 EU washing machine, however, it can be a difficult and time-consuming task. The best course of action would be to consult the manual for instructions on how to replace the bearing, or watch a YouTube video that specifically relates to your model. You may also be able to find the necessary parts on websites such as Amazon or eBay. However, it is advisable to get the help of a professional technician to do the job if you are not comfortable with performing the repair yourself.
Hello I've got a hotpoint washing machine model wml520 the electric door switch had melted on it I replaced it with a new one but the washer won't start any ideas thanks.
If your Hotpoint washing machine is not starting after you replaced the electric door switch, there could be a few different issues causing the problem. Here are a few things you can try to troubleshoot the issue:
- Check the power supply and make sure that the washing machine is properly plugged in and receiving power.
- Check the fuse or circuit breaker to make sure that the washing machine is not tripping any electrical circuits.
- Make sure that the door switch is properly installed and fully seated in the door latch assembly. If the door switch is not properly installed, the machine may not start.
- Check the wiring and make sure that there are no loose or damaged connections.
Washing machine door wont open on hotpoint
remove the front kick strip, on the LHS you will notice a yellow tag. with the power on on the machine pull down twice gently on this tab. this should unlock the door.
if you now notice the drum is full of water its more than likely your filter is blocked and this is what caused the door not to open.
Hotpoint aquarius wmf540 tripping electricity off
Is your washer plugged into a groundfault receptacle if it is and the ground fault receptacle is tripping you need to use less soap in your washing machine or change the receptacle to a non ground fault like a regular 120 V receptacle. the suds are coming down the side of the washer inside and getting some of the electronics Damp and that is tripping out the ground fault receptacle.
Hotpoint WMA58 Pump Wire Broke
Twisting together and electrical tape is not a safe fix with 110 volts and water around. You need crimp connectors and heat shrink sleeving.
Not finding what you are looking for?