20 Most Recent Hotpoint Aquarius WMA42 Front Load Washer Questions & Answers


CTD40 Aquarius Condenser Dryer

This sounds like the thermostats

ForAll Your Appliance Video Help Visit Apart4u video tutorials

see other tumbledryervideos here

Common faults -
1 The heating elements can fail(meaning open circuit)
2 There are cut-outs (T.O.C's) thatmight need resetting
3 The thermostats (stats) can tripout or burn out (meaning opencircuit)
4 Moderntumble dryers also have sensors and pcb's (Printed circuitboards) thesehaveprograms that can fail and circuitry although most should produce an errorcodeshowing you were the fault is.
5 Faultyconnections and burned wires may also bethe fault.

You-Tube video "sfGInKA3yp8" placeholder (do not delete)

9/27/2018 1:29:42 PM • Hotpoint... • Answered on Sep 27, 2018

Hotpoint wma34 stops and prewash light flashes

I would check the water pump for a blockage a button or other debris may be lodged in there preventing it for operating properly eric
1/17/2018 3:19:54 PM • Hotpoint... • Answered on Jan 17, 2018

Hi i have a hotpoint aquarious wfm740 washing

Yes then check the motor carbons
1/10/2018 4:40:17 PM • Hotpoint... • Answered on Jan 10, 2018

Hotpoint WML540 stops mid cycle, end of rinse

maybe the concrete balancing weight has come loose and the fact that most of the water has been drained off when you turn it off for 10 seconds it does not have the one-sided affect anymore also check the damping springs as one may have come off in the violent spin eric
12/27/2017 11:43:05 PM • Hotpoint... • Answered on Dec 27, 2017

The door of my Hotpoint

Call warranty service as trying to fix yourself may void warranty
11/12/2017 1:35:59 PM • Hotpoint... • Answered on Nov 12, 2017

I have a wf321p hotpoint aquarius washing machine. it never stops draining.

Hello! Please check the Troubleshooting part of the manual. https://manualsbrain.com/en/manuals/1861489/?page=18 Hope it will help
8/9/2017 11:33:56 AM • Hotpoint... • Answered on Aug 09, 2017

Hotpoint Aquarius WML520---When washing light

It might be grease from the bearings due to a failed seal.
6/26/2017 2:46:45 PM • Hotpoint... • Answered on Jun 26, 2017

My dum is making loud noise when spin,s

sounds like possibly a sloppy bearing causing the drum to wobble excessively nothing can be done to avoid this other than change the bearing. always assuming your load isn't seriously out of balance of course.
9/4/2016 2:31:57 PM • Hotpoint... • Answered on Sep 04, 2016

Door locked light flashing when door is closed

push on the door where the lock is... it may not be fully locked.

8/2/2016 9:21:10 PM • Hotpoint... • Answered on Aug 02, 2016

Hi there, My washing machine is hotpoint WTL500

My washing machine runs for 10 minutes then all the lights start flashing also there's water in the drum, I've drain the water twice but it does the same thing.
Any idea what's going on there pls.
3/24/2016 8:24:47 PM • Hotpoint... • Answered on Mar 24, 2016

What is the part number to replace the door handle for wmd960g ultima

Hi Margaret I'm having trouble finding the model or brand numberrs you've provided. If you look here http://www.appliancepartspros.com/ge-washer-handle.html you can see a selection of GE washer handles and their part numbers.It's selected for General Electric for vendor since GE manufactures Hotpoint Good Luck! D
11/24/2015 7:13:29 PM • Hotpoint... • Answered on Nov 24, 2015

Water stay in conditioner section of draw

Washing machine working fine conditioner being used but water always left in draw washing machine is cold fill only This video will show you how to keep your soap draw clear and how to service the parts Please remember to subscribe to our YouTube channel for all appliance tutorials a 4 THUMBS rating is appreciated for answering your FREE question. And don't forget to like us on facebook
10/2/2015 7:57:51 AM • Hotpoint... • Answered on Oct 02, 2015

Not going through programme properly

check pump for a blockage.... cheers
3/10/2015 7:48:28 PM • Hotpoint... • Answered on Mar 10, 2015

How will i know if it is the moter that is broken on my wmf540?

The WMF540 motor is usually quite robust, depending on the symtoms.... I would look at the Main control panel, and check the brushes on the motor.
2/12/2015 9:26:12 PM • Hotpoint... • Answered on Feb 12, 2015


check ur door switch , belt, clutch or motor coupler/
2/11/2015 9:34:54 PM • Hotpoint... • Answered on Feb 11, 2015

Washing powder compartment fills up with water

It's probably just caked with powder or conditioner and needs cleaned. Your handbook gives instructions on how to remove the drawer. Alternatively the dispenser to drum inlet hose may be blocked and some hot water may clear that.
7/14/2014 8:56:19 PM • Hotpoint... • Answered on Jul 14, 2014
Not finding what you are looking for?
Hotpoint Aquarius WMA42 Front Load Washer Logo

669 questions posted

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts


Level 3 Expert

2537 Answers

Cindy Wells

Level 3 Expert

6691 Answers

Paul Carew

Level 3 Expert

3809 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Hotpoint Washing Machines

  • Hotpoint Washing Machines

Most Popular Question

cannot read intructions hotpoint

  • Washing Machines