Question about Canon Office Equipment & Supplies
...bad photoconductor unit (PCU), or problem with the transfer roller which is mouned inside the right side door. The PCU consists of 2 main sections; the development unit, with developer ang mag roll ...
...bad drum on your toner 27mm - charge roller - Replace toner 75mm - Photosensitive Drum - Replace toner 34mm - Developing Roller - Replace toner 39mm - Transfer roller - clean/replace transfer ...
Question about Canon Office Equipment & Supplies
...bad set of charge and transfer rollers. These rollers are used to put a charge on the paper and transfer the toner to the charged paper. When the rollers get worn out they can not put the proper ...
...bad charge transfer roller. This roller is located below the toner cartridge. Open the top and remove the toner. Look under where the toner come out from, you will see a black roller that goes from ...
...TRANSFER ROLLER. THIS IS AFTER WE GOT THE 17H ERROR MESSAGE. THAT WAS RESOLVED, BUT NOW THE PAPER KEEPS JAMMING. ANY SUGGESTIONS? yes 2 things. 1 bad sensor. 2 bad paper. change paper brand and type. ...
...the message "80 What does the message "80 transfer roller missing" mean? This means that the transfer roller is missing. It is lokated in the back cover. Check for presence or bad
Question about Canon Office Equipment & Supplies
...bad printing is the transfer roller part # RF5-4067. The transfer roller applies a charge to the paper so the toner transfers ok, if the roller is worn or damaged it will not charge the paper right ...
Question about Canon Office Equipment & Supplies
problems you described, change the toner. If it looks good, reinstall the old transfer roller and rerun the test. If transfer roller doesn't fix it, you have a bad fuser. Put the old one in and repeat
...when the pressure is applied to the transfer roller. That code you have is stating its not doing its job. Recommend a qualified tech look at it. it could also be the High Voltage board #2 is
Question about Canon Office Equipment & Supplies
...If it has the gray cast, you have a bad toner cartridge or a bad transfer roller. It could also be a dirty ground. Try vacuuming out the inside of the printer especially around the transfer
979 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions
