20 Most Recent Canon imageRUNNER 5000 Copier Questions & Answers

not sure whats the question

Canon... • Answered on Jan 07, 2020

it is fuser heating problum replace heater unit

Canon... • Answered on Dec 27, 2019

KABRaji, Your copier print board is faulty or some loose wiring. also posible if some fault in counter pcb

Canon... • Answered on Oct 29, 2019

tanda error E00000i-0000 canon 5000i

Canon... • Answered on Jun 14, 2019

sst itu Service Support Tool kl sm apa ya? kalo mau sst nih linkya
n nih frmware ir 5000-6000

Canon... • Answered on Apr 10, 2019

The laser shutter is faulty. The laser unit is faulty. The potential measurement

PCB is faulty. The DC controller PCB is faulty.

Mode of


0001 As the result of potential control, the drum surface potential (VL2)

of the white background is about 200 V (generating solid black images).

0002 The primary charging output used for print output and the drum

surface potential after laser output has been made are about 200 V

(generating solid black images).

Canon... • Answered on Mar 30, 2019

code 602-003 means a new hard drive

Canon... • Answered on Mar 29, 2019

Write your answer...pliz help
when i press *28* the displabrly indeed changes but i cant see the copier function

Canon... • Answered on Mar 27, 2019

E000 error means the fixing assembly is overheating.

You will need a Service technician to fix this.

Canon... • Answered on Jan 25, 2019

The problem is with the adf. You can try to reseat the connectors on the adf controler PCB. Only do this with the copier turned OFF. If that does not work you will most likely need to replace the adf PCB

Canon... • Answered on Jan 04, 2019

that connector is located at the hooper assembly open the front door then at the right side of that machine remove the 3 screw of the hopper assembly then you will see the hopper connector maybe its not connected to the terminal jack just connect it then return all the screw you remove thats all

Canon... • Answered on Dec 11, 2018

ur hopper moter does not move in 3 second pls cheak ur hopper moter signal ;gear

Canon... • Answered on Jun 15, 2018

Hi. you need to enter in service mode in the control panel do the next key secuence: press adittional function press 2 press 8 press again adittional function. service mode should appear in the screen: (#SSW) tap in the arrow ? or ? and search for CLEAR press OK once, with arrows search for ENGINE and press Ok once, with arrows search for ERRCLR and press OK once more. turn off the machine from the main switch for about a minute and restart it. try to make some copies, if problem persist there is a malfunction in the fixing unit, get technical support. if this answer was helpfull , please rate it. thanks

Canon... • Answered on Feb 20, 2018

E733 0001 - A fault is detected by the main controller PCB in the communication between the DC controller PCB and the main controller PCB.
Main cause The connector has poor connection. The DC controller PCB is faulty.
1. Connector, DC controller PCB Is the connection between the connector J1015 on the main controller PCB and the conductor J316 on the DC controlled PCB normal?
NO: Correct the connection.
YES: Replace the DC controller PCB

Canon... • Answered on Jan 29, 2018

Hello bungo. This code means that an area of the machine called the fixing/fusing unit which always runs at an extemely high temperature( and therefore is closely monitored) sensed a temperature error. I will gladly tell you how reset the error code which will allow the copier start fresh. As the copier starts up it will look again and the temperature and if there is a something wrong it will shut down again. This code can be caused by wierd things like electrical noise so its worth a try.Let me know if you wish to proceed as it is quite easy to reset. :->

Canon... • Answered on Jan 05, 2018

This is a potential control error. The problem can be solved by a general tune up by replaceing some corona wires. If that doesnt work then the sensor pcb should be replaced. This also requires a special tool.

Canon... • Answered on Dec 29, 2017

I need sst firmware of canon ir6000 can anyone help me out my email id is [email protected]

Canon... • Answered on Oct 16, 2017

bos tolong nih, kode error E00004-0010 pada mesin canon ir 6570, gimana solusinya. terimakasih sebelumnya

Canon... • Answered on Aug 31, 2017

Not finding what you are looking for?
Canon imageRUNNER 5000 Copier Logo

978 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2347 Answers

Cindy Wells

Level 3 Expert

6280 Answers


Level 3 Expert

5720 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Canon Office Equipment & Supplies

  • Canon Office Equipment & Supplies

Most Popular Question

service manual canon ir 2520i copier

  • Office Equipment & Supplies