I blew a fuse in the tv and replaced it but still cant get a pic. Is there some kind of reset button

It' seems short circuit . kindly check your input card and power supply .

its usually your cable box or sat box. reset by unplugging box let sit for 10 min.

open it up and on the inside is a fuse replace it check outlet in wall to make shure it is working

Maybe the horizontal output IC are on short circuit.

you most likely blew a fuse the only "reset" is to unplug the t.v. and leave it unplugged for a few mins, then make sure that you hold down the power button to drain the power out of the t.v.then turn it back on.... only other reset sequence is for removing the parental code

In my openion, Highly Qualified Sony technician will do this job properly because your TV needs modification in C2 Board.

six inches will just reach the bottom of the main cuircit board. Does the units green light flash? there is no reset hutton there is a fuse. but i would suspect if it got wet then something blew

maybe a fuse blew out or maybe a wire came loose. check the fuses first then check the wiring make sure everything is cool. then smell the cd player if it has a funky burnt smell kind of like burnt olives or almonds it blew the diode and its toast.

I would disconnect the heater then run the unit.If it runs the heater is bad,if the fuse blows again the motor is most likley bad.make sure there are no water leaks.let me know.happy holidays

In most cases, it is either a shorted component in the power supply or a shorted horizontal output transistor. It will take experienced electronic troubleshooting to fix it. TVs have lethal voltages (both 110V and 25,000V kind) and improper repair can result in shock, injury, or the emission of X-rays by the TV! Be safe and either replace the set or have a shop work on it for you. I'm a tech with over 25 years of experience, by the way. I appreciate honest rating of this reply if you find it helpful.