20 Most Recent Proscan 32LA30Q Television Questions & Answers


Does the audio still work normally? If so uits most likely the inverter board which has failed and you can get a replacement inverter from www.tvcircuitboards.com

Proscan 32LA30Q... | Answered on Nov 26, 2017


phone_header_def.png saveupto_a.png phone_callnow_def.png DIRECTV Specials DIRECTV Packages DIRECTV Receivers DIRECTV DVR DIRECTV HD DIRECTV vs. Cable DIRECTV vs. Dish DIRECTV Sports Home > Remote Codes DIRECTV Remote Codes remote_codes_header.jpg TV CODES VCR CODES DVD CODES STEREO RECEIVER CODES
STEREO AMPLIFIER CODES DIRECTV RECEIVER CODES

Program TV Code
1. Turn on the TV.
2. Locate the 5-digit code for your TV.
3. Slide the MODE switch to the TV position.
4. Press and hold the MUTE and SELECT keys at the same time until the green light under the TV position flashes twice, then release both keys.
5. Using the number keys enter the 5-digit code for your brand of TV. If performed correctly, the green light under TV flashed twice.
6. Aim the remote at your TV and press the PWR key once. Your TV should turn off. If it does not turn off, repeat steps 3 and 4, trying each code for your brand until you find the correct code.
7. Slide the MODE switch to the DIRECTV position. Press TV POWER. Your TV should turn on.

Program DVD, VCR, Stereo Receiver, and Stereo Amplifier Code
The AV1 and AV2 switch positions can be setup to control a VCR, DVD, STEREO, second DIRECTV Receiver or second

1. Turn on the component you wish to control (e.g. your DVD Player).
2. Locate the 5-digit code for your component.
3. Slide the MODE switch to the AV1 (or AV2) position.
4. Press and hold the MUTE and SELECT keys at the same time until the green light under AV1 (or AV2) flashes twice, then release both keys.
5. Using the NUMBER keys, enter the 5-digit code for the brand of component being set up. If performed correctly, the green light under the selected position flashes twice.
6. Aim the remote at your component and press the PWR key once. The component should turn off; if it does not, repeat steps 3 and 4, trying each code for your brand until you find the correct code.
7. Repeat steps 1 through 6 to set up a new component under AV2 (or AV1).

Unable to Find Correct Code
If you were unable to find the code for your brand of TV or component, you can try a code search. This process may take up to 30 minutes.
1. Turn on the TV or component. Insert a tape or disk if applicable.
2. Slide the MODE switch to the TV, AV1 or AV2 position, as desired.
3. Press and hold the MUTE and SELECT keys at the same time until the green light under the selected switch position flashes twice, then release both keys.
4. Enter 9-9-1 followed by one of the following four digits:
Satellite - 0
TV - 1
VCR/DVD - 2
Stereo Receiver/Stereo Amplifier - 3
5. Press PWR, or other functions (e.g. PLAY for VCR) you want to use.
6. Point the remote at the TV or component and press CHAN+. Repeatedly press CHAN+ until the TV or component turns off.
NOTE: Every time CHAN+ is pressed the remote advances to the next code and power is transmitted to the component.
7. Use the CHAN- key to step back a code.
8. When the TV or component turns off, stop pressing the CHAN+ key. Then, press and release the SELECT key.
NOTE: If the light flashes 3 times before the TV or component responds, you've cycled through all codes and the code you need is not available. You must use the remote that came with your TV or component.

Proscan 32LA30Q... | Answered on Nov 22, 2016


This made my humming sound go away completely;


From JD at oncorpus.com [manufacturer of the 32LB30Q]


Please follow these instructions, should fix the hum issue:

1. Turn tv on
2. Input mode should be tv
3. Turn volume to zero
4. With remote enter 9 8 7 6
5. A menu will appear on left side
6. Arrow down to backlight and with right arrow key move number from 81 to 83, press menu button twice,
7. Turn up volume and listen if hum is gone.

John

Proscan 32LA30Q... | Answered on Nov 11, 2016


Go to menu. Then channel or tuner. Should have option to auto scan

Proscan 32LA30Q... | Answered on Sep 11, 2016


Well without actually opening it up and determining where the problem is, it's unlikely you will get it to come back on. I suspect something wrong with the power supply but it could be something else also.

Proscan 32LA30Q... | Answered on Mar 03, 2015


go to www.proscanvideo.com

Proscan 32LA30Q... | Answered on Feb 22, 2015


hi travis,
you din't mention what happened after you disconnected the main board. unplug and plug is not bypassing.to bypass the main board you have to keep it disconnected.if the back lights come on and stay on after main board disconnected, the main board is defective.
good luck.

Proscan 32LA30Q... | Answered on Feb 16, 2015


Turn it on and see if it works fine! If not, please report back! you should not remove the capacitors if you are not facing any issue!

Proscan 32LA30Q... | Answered on Feb 15, 2015


Absolutely! To provide a better solution to your problem, however, you will need to provide model numbers of your TV and surround sound system. Depending on the available hookups and your hardware, you may need a received to make everything compatible.

Proscan 32LA30Q... | Answered on Jan 11, 2015


Wow it took me a couple hours but hey i found the code ever1 needs and its a 5 digit code for comcast remotes with the red ok button the codes r 10090 or 10030 hope ive helped u out good luck

Proscan 32LA30Q... | Answered on Oct 05, 2014


Do a reset to this set, and try again. To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

Proscan 32LA30Q... | Answered on Sep 04, 2014


Back-light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
http://electronicshelponline.blogspot.com/

Proscan 32LA30Q... | Answered on Aug 15, 2014


Sounds like the main power regulator board [SMPS] itself. Check for any loose solder terminals at this board. Contact any service technician to assist. Check and replace damaged component/s at it main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. Do asearch by type in the brand name of your device at its search box.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis.

Proscan 32LA30Q... | Answered on Jul 24, 2014


If the voltage output from the main power regulator board is abnormal, this kind of fault can occur to LCD TVs. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. Do a search by type in the brand name of your device at its search box and press "Enter".
http://electronicshelponline.blogspot.com/

Proscan 32LA30Q... | Answered on Jul 22, 2014


Back-light fault. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Surf the site with patience. Pull up older posts. Do a search by type in the brand name of your device at its search box. It will be best to replace the inverter board as card basis.
http://electronicshelponline.blogspot.com/

Proscan 32LA30Q... | Answered on Jul 07, 2014

Not finding what you are looking for?
Proscan 32LA30Q Television Logo

272 questions posted

Ask a Question

Usually answered in minutes!

Top Proscan Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76046 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Are you a Proscan Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Proscan Televison & Video

  • Proscan Televison & Video

Most Popular Question

power supply in proscan tv 32 inch dead

  • Televison & Video
Loading...