Question about Proscan 32LB30QD 32 in. LCD TV

2 Answers

Proscan TV HDMI no signal

I get no signal when using HDMI -1 or HDMI-2.. I unplugged it and left for 30 min. Then, plugged back and nothing. I was able to use this 4 weeks ago.

Posted by mike_scott19 on

Ad

2 Answers

SD Tech

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Proscan Master
  • 14,553 Answers

I presume the non HDMI inputs including component work---what are you feeding to the two inputs in question?

Game unit?
Output from a Computer?
Output from a HD cable box?

First thing I would do is go into menu and make sure those inputs are not "grayed out" means locked out.

Second thing I would do is if from only one kind of unit you are trying each input (understand I have seen this before) to disconnect power from set and from whatever is providing the signal.

Sometimes a glitch can occur and if someone tries to connect things with either or both units powered this can be the result--HDMI in some cases does not like that--and a set can sometimes detect nothing is connected and lock that input out if you do it with the units powered up.

The remaining possible answers are:

A bad board which has the HDMI connections on it (unlikely but possible)

The set (if it has it) needs a hard reset done to restore to factory settings.

The set may also have a software/firmware update available for this.

If its Proscan (Thompson--RCA/GE/PROSCAN) INFO or help from them is going to be nearly impossible to obtain.

SD TECH

Posted on Apr 22, 2012

Ad

michael williams

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

You have to press right on the controller after you scroll down to the Hdmi you want in order to select the input

Posted on Jun 11, 2014

Ad

3 Related Answers

budmrtn

Bud Martin

  • 11361 Answers

SOURCE: wont turn on have tested

You will need to do more in-depth troubleshooting,
Please read my guide to get more understanding on how the TV works.

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm
Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Parts: www.shopjimmy.com
Parts: http://interliquidparts.com/

Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps.
Or www.digikey.com, just make sure to use caps with low ESR, 105c, high ripple current and long life rating such as PANASONIC FM or FC series.
Please post back what you find.

Posted on Aug 02, 2011

paul proctor

  • 4102 Answers

SOURCE: Hooking up XBOX 360

Hi have you tried going into the menu option using the telly controll and switching the hd mode on this should then allow you to use the xbox through hdmi cable

Posted on Feb 29, 2008

SOURCE: "No Signal" Message when using HDMI Inputs on 26" Proscan LCD TV

You MUST get HDMI Driver for your Video Card, it is NOT standard. You need to go to PC makers web site and download latest Video Divers for your PC, then you must set up Multiple Desktops, To do that you must first connect the TV, but leave OFF, connect up to PC, reboot, setup Video Card, turn ON TV, TV will have already been detected, On PC, Share the desktop, or Clone, whatever you wish, now reboot after saving settings. Now you set the TV for HDMI already and it should show you a desktop when chosen. You must select and setup TV, FIRST, then connect the PC. From then on, Turn the TV ON, then turn the PC ON, that way it will Always detect the HDMI port.

Posted on Apr 23, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Telefunken TV with no signal

Unplug the HDMI cable from your Bell MTS Fibe TV Set-top Box. Wait 30 seconds. Plug the HDMI cable back in. Wait for the signal to initialize.
0helpful
1answer

On my e-motion tv when I switch it on and go onto did it says no signal....help please

Why does my TV say no signal? If your HDTV or Standard TV displays a "No Signal" error message, it may be due to one of the following issues:
  1. Determine how many TV's are affected.
    • If it is one TV, continue to step two.
    • If multiple or all TV's are affected, continue to step five.
  2. Ensure that your HDTV is on the same source/input as your MTS Ultimate TV service.
    1. Press the TV button on your MTS Ultimate TV remote control.
    2. Press the TV/Video button.
    3. Wait 10 seconds.
    4. Repeat steps b and c continually to cycle through all the available source/inputs on your TV until the correct source/input is selected. (ie. HDMI 1, HDMI 2, Component 1, Component 2, etc.) On standard TV's (non HDTV), you may have only 2 choices, TV or Video.
  3. If the source is correct from step two:
    1. Unplug the HDMI cable from your MTS Ultimate TV Set-top Box.
    2. Wait 30 seconds.
    3. Plug the HDMI cable back in.
    4. Wait for the signal to initialize.
    5. Make sure all cables connected on the set-top box and your TV are secure.
  4. If the problem persists:
    1. Unplug the power cable from the back of the MTS set-top box.
    2. Wait 60 seconds.
    3. Plug the MTS set-top box back in.
    4. Wait for the signal to initialize.
  5. If you are still experiencing a problem:
    1. Make sure ALL Ethernet and/or Coax cables are securely in place.
    2. Unplug the power from the MTS box labeled 2Wire or Pace as well as the affected set-top boxes.
    3. Wait 60 seconds.
    4. Plug the power back into the MTS box labeled 2Wire or Pace.
    5. Wait for the broadband light to turn a solid green colour.
    6. Plug the power back into the affected set-top boxes.
    7. Wait for the signal to initialize.
Good Luck
0helpful
1answer

No signal from hdmi for LG TV (lg47lm7600).

Looking around I find that LG is known for this type of break. Unplug TV for 30-45 min, plug back in. The key is to discharge TV by doing so. I would bet that this is a design flaw or hardware anomaly. If this is the case, buy another TV and expect to get 4 years max out of it... Crappy manufacturing and design is most likely the culprit.
0helpful
1answer

Proscan 42LA45H has picture and no sound

Good day!!!!


That problem is usually cause of faulty capacitors on the power supply board..

Just follow this instruction to fix your TV..

1. Open the back cover of your TV.
2. Look at the power supply board..Its normally connected to the power cord..
3. After that,,try to look at the actual image of capacitors if it is bulged on the top so that you can easily determine the bad capacitors..
4. After that,,try to replaced the bad capacitors using soldering iron and soldering lead..replaced the capacitors only with the same type ratings and value..
5. Some of the capacitors not bulged so its better if have a capacitance meter
0helpful
1answer

"No Signal" Message when using HDMI Inputs on 26" Proscan LCD TV

You MUST get HDMI Driver for your Video Card, it is NOT standard. You need to go to PC makers web site and download latest Video Divers for your PC, then you must set up Multiple Desktops, To do that you must first connect the TV, but leave OFF, connect up to PC, reboot, setup Video Card, turn ON TV, TV will have already been detected, On PC, Share the desktop, or Clone, whatever you wish, now reboot after saving settings. Now you set the TV for HDMI already and it should show you a desktop when chosen. You must select and setup TV, FIRST, then connect the PC. From then on, Turn the TV ON, then turn the PC ON, that way it will Always detect the HDMI port.
1helpful
1answer

Cannot remove input label from Panasonic Viera's screen

Are u using HDMI/1 hook up HD box and signal?The HDMI/1 port still work?Do u use the device in the HDMI/1 port lately dose it work?Replaced the HDMI cable,Unplug the tv about an hour,plug it back in,reset it back to factory setting again.See if this work,not than ur HDMI/1 is shorted.
1helpful
3answers

When using an HDMI cable there is no sound

Unplug,replug the tv about an hour reset the audio back to factory setting.Should work if ur main tuner signal board is good.
0helpful
1answer

''no signal'' message on blue screen after watching for 10-30 min

First try another signal input like a DVD player or other source, is the signal displayed ok? Then you have lost the signal on one input from whatever the device is.
1helpful
1answer

42" Sanyo HDTV with 3 HDMI Inputs

Everybody is having problems with sony products and HDMI cables. It's on a lot of forums. So, your not alone.
Most of the solutions are:
1. Unplug your TV for 30 mins.
2. Plug TV back in and put it on HDMI for PS3.
3. Hold down the power button for 10secs on the PS3
That should solve the problem.
0helpful
1answer

Sound Problems ProScan 61" Model#PS61670

A technician here suggested that I unplug any VHS or CD player as this could cause it. After doing this I had the TV on for about 4 hrs and didn't have any trouble. So far so good. Thanks for checking on me. I really like your Web page it's most helpful.
Not finding what you are looking for?
Proscan 32LB30QD 32 in. LCD TV Logo

6,955 views

Ask a Question

Usually answered in minutes!

Top Proscan Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76758 Answers

Ekse

Level 3 Expert

13435 Answers

Cindy Wells

Level 3 Expert

6352 Answers

Are you a Proscan Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...