- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Error 1201; Carrier stall; Printer stopped
The definition corresponding to this error message is this: "The print carrier stopped before all of the data was used." To resolve this issue, please do the following:
Power the printer off.
Remove all cables from the back of the printer.
Reinsert the power cord.
Switch the printer back on.
Check the operator panel to see if the 1201 error message is displayed.
If the error message returns, the printer could be defective. Contact Lexmark Customer Support for further troubleshooting and warranty options.
- Power the printer off. - Remove all cables from the back of the printer. - Reinsert the power cord. - Switch the printer back on. - Check the operator panel to see if the 1201 error message is displayed.If the error message returns, the printer could
be defective. Contact Lexmark Customer Support for further
troubleshooting and warranty options.
Hello, erorr 1203 is telling you there is one of a few issues with your cartridge/s. Check the contacts are cleaned and printheads. Make sure there are no paper jams. Reset the printer by turning it off and completely unplugging it and replugging it and turn it back on again. Clear print queue, check it is set to work offline in settings. Press copy and copy something and see if it is ok now. Error 1201 is a communication issue with data where your cartridge has stoped for one or more reasons and h eprint data was not completed or used. Try the reset to fix this too. Post back if no good. Don't forget to clear print queue.