Gear jumps out on loading auger on a #352 new holland cattle feed gringer

There are a few possible causes for this issue with your pellet stove. One possibility is that there is an issue with the auger feeding the pellets into the burn pot. The auger could be clogged, or the timing of the auger may need to be adjusted. Another possibility is that there is an issue with the airflow in the stove, which is preventing the fire from maintaining a consistent flame. The air intake or exhaust vents could be blocked, or the blower fan could be malfunctioning. Additionally, the control board of the stove could be malfunctioning, causing the auger and blower to cycle on and off erratically. It may be best to consult with a professional technician to diagnose and fix the issue with your pellet stove.

is thermostat working

Link may provide some help
https://www.tractorforum.com/threads/new-holland-t2420-ehss-slips-out-of-gear.37463/

http://articles.extension.org/pages/39472/what-is-your-opinion-about-feeding-natural-diatomaceous-earth-to-cattle-would-de-dusted-on-cattle-ki

You may get more responses by listing in other categories for lawn equipment or farm equipment. Would say that this could be clutch fork problem. Not familiar with your unit, do not know if you have hydraulic clutch assist. I have 3 tractors myself. If I had one jumping into neutral by itself, it could suddenly jump into gear as well. Not safe Call dealer it may be recall problem.

It depends. If if has an external power supply, you can try a different supply of the same rating. Beyond that, it may be a blown fuse, which may be internal on the power supply board, or as you say perhaps a broken power switch. Whether it's easy or not will depend on your diagnostic skills, how much you know about electronic repairs, and your availability of parts.
Generally, i suggest people take their repairs to professionals as poking around inside electronic gear can cause more damage, both to the gear and to themselves.

How to Repair a Pellet Stove Auger That Won't Turn ' Home ...

homeguides.sfgate.com > Outdoors > General Repair

Cleaning the hopper, removing and replacing the auger and installing a new motor and ... Most pellet stoves do not have a removable auger cover, but you can see a ... youcan hear the motor attempting to spin the auger, turn off the auger and ...

Why wont my Auger feed pellets? ' Hearth.com Forums Home

www.hearth.com > ... > The Pellet Mill - Pellet and Multifuel Stoves

Jan 6, 2008 - Two #1 reason auger motor will not operate is: PRESSURE ..... Hopperlid trip switches now used on some stove will stop the auger and on the ... Harman Auger will not stop.
Oct 11, 2015
auger won't turn on Lopi Leyden
Oct 14, 2013
harman accentra will not turn off
Dec 31, 2011
Harmon Accentra feeding continually but no ignite
Jan 14, 2008
More results from www.hearth.com

Whitfield pellet stove repair, pellet stove repair, auger re

It seems a bit obvious but contact New Holland. I've just searched "wiring diagram new holland" and got a whole load of images. You'll need a magnifier though! Also try parspring.com and tractorbynet.com. either of these could be helpful.

No safety switches that will shut the engine off while auger is switched on is on the seat ( showing you are not off the tractor with the auger running) and on the Gear shifter showing that you are sitting while tractor is moving. Simple two wire switches that can be Jumped out to trouble shoot the switch. Pull the wires off the switch and connect them together.

RAP yellow dispense failure