Toner missing on Tally Genicom 9045 - Printronix 043842 - Tallygenicom 9045N Laser Printer - Monochrome - 45 Ppm Mono - 1200 X 1200 Dpi - Usb, Parallel, Serial - Fast Ethernet - Pc, Mac

it is driver issue otherwise logic card have to replace...

The print engine will be the same (supplied by Xerox) the control boards were for both TG and Oki printers designed by part of TG before bankruptcy in 2009.
Importantly the toner cartridges have a chip on them to identify to the printer which cartridge is inserted, the chip on the cartridge will more than likely be the only difference. Hence you see the Missmatch message when you insert the cartridge in the wrong printer.

try to find out how to reset your Printer and try it on.

Tally genicom 5040 passbook printerre download the drivers and make sure you have a good connection (USB )

I am afraid the TI 8920 is a rather old model of printer, with the Texas Instruments brand or printer long discontined and with the demise of Genicom there are no Windows 2008 drivers for this printer.
You may wish to use the Generic Text only printer driver inculded within the Windows Add Printers Wizard, I do not belive there is any alternative

BTR = Bias Transfer Roller, not the toner cartridge. As the message says , replace it.

The problem coming from your logic card hammer bank cable . Need to be replace logic card and hammer bank cable.

problem for lipi 6312 tally genicom line printer my printer shows an error (hammer voltage 1)

This link contains Dot Matrix printers from various manufacturers. I believe your printer is a 24 pin printer:

http://www.superwarehouse.com/24_Pin_Dot_Matrix_Printers/c3/2525

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

What do you mean picking papers. Do you mean feeding the paper, or printing with certain types of paper?