I hv Sanyo PLC-SU07N Projector
I have a possible solution however it may not be THE solution your after, you'll probably be able to tell very quickly if it isn't, this will only apply if you are using either a component video signal or a PC/laptop signal to send to the projector.
If you are using a laptop or desktop to hook up your projector, I would try first of all double checking that it's correctly plugged in, and if you still have no luck try a different cable.
It's likely to be the cable because when the signal goes down the cable it's split into 5 different signals. 3 of these are the colour information for Red, Green and Blue. Depending on what you mean by 'image is blue', it could mean that your either not getting the information for Red, or your not getting the information for Red AND Green. If you want to test this, open up microsoft paint while connected to the projector and create 3 boxes, then fill 1 completely red, 1 completely green and one completely blue. If you are missing the information to any of these colours then that colour will appear black on the projector screen.
In component video the signal is split down 3 cables (rather than 5) and 2 are colours (rather than 3)... Red and Blue. Check that the cable running red (Usually labelled Pr on the DVD and projector) is completely plugged in (some of these are really tight, but it's important that it goes all the way) and also that you have plugged into the correct slot, for instance that you have plugged into Pr and not the right Audio channel, both of which are coloured red.
If you are still not having any luck then I would suggest using a computer monitor or a television (depending on what type of signal your sending it) to test the projector. Plug it in instead of the projector and if it works then the issue lies with the projector and I have at least narrowed it down for you.
Hope this has been helpful.
Problem sanyo projector having yellow tint
I own a Sanyo PLC-XU305 Projector, the colours are not good, I tried to fix them but nothing, the red is not red but a lot diferent, what do I have to do to fix the problem?? thanks a lot
Sanyo PLC-XU305 Projector
Being an old projector and possibly it has an old lamp fitted.
The lamp as it ages produces more heat. The fans as they age unless cleaned regularly. This build up of heat damages firstly the blue LCD imager and then the red.
Nothing can be done about that except replace the LCD imagers.
As a Sanyo Authorised service department, we used to charge them out at £1031 plus fitting.
Manual book microwave super showerwave model Sanyo cm s103
?? ???? ???????????? $?????? ?????????? ???????? ???? ?????????????? ???? ?????? ?????? ???? ????????. ?? ?????????? ?????? ?? ???????? ???????????? $?????????? ???????? ???????? ????????????????. ???????? ???????????????? ???? ?????????????????????????? ???????????????????? ?????? ?????? ???????????? ???????????? ?????? ???? ???? ???????????????? ???? ???????????????? ???? ???????? ???????????? ????????. ???????? ???????????????? ???? ?????? ?????? ?????? ???????????????? ?????? ?????????????? ???????? ???? ?? ?????????????? ???????? ???????? ?????????????? ?????? ???? ?????????????? ???????? ????????.
???????? ????????......===))> ??????.??????????????.??????
Dvd says no disc or disc error
It sounds like you need to clean u'r lens in the DVD player. You can buy discs that will do that for you. Hope this helps
Sanyo VM-D66P error: CASSETTE
There is a pulley that breaks inside but as these have been obsolete for over 20 years, I doubt it is repairable any more.
Fully working VM-D66p for £30 on amazon or fleabay.
Not finding what you are looking for?
