Haier Dishwashers - Popular Questions, Answers, Tips & Manuals

It has a leak into the drain pan. It is flood protection.

Haier Dishwasher Error Codes Explained

Exclusive Repairs https://exclusiverepairs.co.uk > Blog Dec 8, 2021 - Haier dishwasher E6 error code indicates that the flood protection device has been activated and the water supply will need to be turned off, . ..

Contact the seller or Haier direct as it is still under warranty. Just for information, we are Fixya, we aren't Haier. https://www.haierappliances.com/support ..

First thing to try is a reset.. Unplug or turn it off at the breaker for 5 minutes. You can also try this but it's used to clear error codes.... Simultaneously press and hold Cycle Select and Start pads for 5 seconds. Press ANY button to complete the reset process. ... The unit will now be ready to use/function normally at this time.

If your Haier DW12 dishwasher is not switching on, here are some steps you can take to troubleshoot the issue:

1. Check the power source: Make sure that the dishwasher is properly plugged into a functioning power outlet. You can test the outlet by plugging in another device to see if it works.
2. Check the circuit breaker: Check the circuit breaker for the room where the dishwasher is located. If the circuit breaker has tripped, reset it and try turning on the dishwasher again.
3. Check the door latch: Ensure that the dishwasher door is fully closed and the latch is properly engaged. The dishwasher will not turn on if the door is not securely closed.
4. Check the control panel: Inspect the control panel for any damage or signs of wear. If the buttons or display are not working, it may be a problem with the control panel.
5. Check the fuse: Check the fuse in the dishwasher's power cord. If the fuse is blown, replace it and try turning on the dishwasher again.
6. Professional repair: If none of the above steps work, it may be a more serious problem that requires professional repair. It is recommended to contact Haier customer support or a professional repair technician for assistance.

It is important to take caution when attempting to troubleshoot or repair a dishwasher, as these appliances can be dangerous if not handled properly. If you are not confident in your ability to perform repairs, it is best to seek the assistance of a professional.

With 30,000 9.4 out 10 reviews, they must be good! It won't be the element though, it will the thermistor or the thermostat that is failing. Some can be calibrated. It may also be a failed circulation fan on a fan assisted oven. Test the oven first with an oven thermometer. elements can be tested for resistance, but in my experience they work or they don't, they don't half work. https://fixpart.de/de/uber-uns ..

The float switch may be stuck.

user manual https://www.manualslib.com/manual/548406/Haier-Hpn12xhm.html https://www.haierappliances.com/support/manuals

Just wondering if you found the problem as ours has just started throwing the"E30" code

check out this site. they have the fuses and some videos on how to test and replace which will tell you where it is https://www.repairclinic.com/Shop-For-Parts/b198c44/Haier-Fuse-Thermal-Fuse-Breaker-Parts

OK. When you see water on the floor, and you open the door, is there any water rising in the wash chamber and breaching the seal? If you open the door and do not see any water other than the water dripping off the dishes or whatever, I would suspect there's a leak underneath. If you see water standing in there, they you will want to clean the food/debris trap. Refer to your manual, if you have one. If the food trap is cleared and the water is still comin out, I would suspect a leak underneath the unit, possibly a loose water hose or drain hose.

Sounds like the dishwasher control panel has failed.

This is most likely an issue with the control panel.

How to Post A New job on Facebook Timeline Today I will train you a way to submit new activity on Facebook Timeline. And a way to do that, in How to Post New Job on facebook

call for a service check under warranty

This is either a fault with the temperature sensors or the timer it's self, Not a simple one to diagnose without some general knowledge of how these circuits operate

Turn off circuit breaker and wait for some period . Then turn on check .Have a look on tech https://meethamango.com/

If its never drained properly, then perhaps it was installed incorrectly. Check that the drain hose goes up and over the machine before connecting to the homes drain pipe.

Sounds like your control board is in need of replacement. For the time being instead of shutting off the breaker just close the door to the unit but don't latch it. To start the unit the handle needs to be locked unless there is something that I am missing. Good luck...

Make, model, serial number of your unit is ... ? I have dealt with capacitors for over 50 years, so I know what I'm doing. But there is no such thing as a five MICROVOLT capacitor, which is what 5uv means to a scientist like myself! Did you mean five micro FARAD, which should be expressed 5uF? But the voltage rating is critical, and the physical size is critical and the temperature rating is critical and the lead diameter is critical and the lead spacing is critical and the style (axial lead versus radial lead) is critical.