20 Most Recent Haier ESD200 Built-in Dishwasher Questions & Answers


I useto have same problem. For some reason there was water under machine, then i tilted machine, clean water and problem solved. This is built-in dishwasher that is why water acumulates under machine and "leak cut off switch" turn off machine. You can't reset machine while you have water under, machine telling you there is a problem, but Haier wan't put solution on their site - Haier suport is very bad. Sorry for English and hope this help.

Haier ESD200... | Answered on Feb 20, 2017


I had the same thing the drain hose was plugged.To reset You have to tilt the washer back 45 degrees.Mine is now running hope this helps.JIM

Haier ESD200... | Answered on Jan 18, 2016


Hi,


Here is a tip that I wrote about dishwashers and them leaking.

Leaking Dishwasher

heatman101


vb

Haier ESD200... | Answered on Sep 29, 2010


i am with you on this...same problem...

Haier ESD200... | Answered on May 28, 2010


check for water in the pan below dishwasher

Haier ESD200... | Answered on May 28, 2010


Check that the spray arms rotate properly and that none of the jets are blocked

Haier ESD200... | Answered on May 01, 2010


try removing the plug and again restart it

Haier ESD200... | Answered on Jan 28, 2009


Yes, you may even be able to pick the part up as an in-stock item at your local appliance parts supply house. The place the local appliance repair pro's go to get parts.

Replacing the actual element is fairly easy. Its typically a few screws and two wires the simply disconnect via stakon connectors or a molex plug.

The "hard part" is actually getting to the elements mounts and wires. with most units you have to remove a panel or two, to get to the element housing and access the element.

The main thing? Make sure power is disconnected, and pay close attention to how everything comes apart and which direction each piece was originally installed.

It may help to get paper and draw yourself a diagram of the disassembly process.

Haier ESD200... | Answered on Dec 07, 2008


check out this site. they have the fuses and some videos on how to test and replace which will tell you where it is
https://www.repairclinic.com/Shop-For-Parts/b198c44/Haier-Fuse-Thermal-Fuse-Breaker-Parts

Haier... | Answered on May 27, 2019


OK. When you see water on the floor, and you open the door, is there any water rising in the wash chamber and breaching the seal? If you open the door and do not see any water other than the water dripping off the dishes or whatever, I would suspect there's a leak underneath. If you see water standing in there, they you will want to clean the food/debris trap. Refer to your manual, if you have one. If the food trap is cleared and the water is still comin out, I would suspect a leak underneath the unit, possibly a loose water hose or drain hose.

Haier... | Answered on Apr 27, 2019

Not finding what you are looking for?
Haier ESD200 Built-in Dishwasher Logo

25 questions posted

Ask a Question

Usually answered in minutes!

Top Haier Dishwashers Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Brad Brown

Level 3 Expert

18562 Answers

Peter

Level 2 Expert

202 Answers

Are you a Haier Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Haier Dishwashers

  • Haier Dishwashers

Most Popular Question

all 4 lights haier dishwasher model

  • Dishwashers
Loading...