Home Security - Page 5 - Answered Questions & Fixed Issues
How to put knob on front of safe back on.
Question edited for spelling of 'knob' from (nob).
Question moved to Safes - Home Security form Cars and Trucks
AI Answer Bot Answer Deleted!
Open the safe and remove the door liner.. You will see the screw that holds the knob to the door.
Please include full 'make model (what is is)' in all questions please or we guess.
8/23/2023 5:55:05 AM •
Home Security
•
Answered
on Aug 23, 2023
•
45 views
Defiant Motion outdoor light flashed red and stopped working
Hi! If your Defiant Motion Outdoor Light flashed red and stopped working, there could be a few potential causes for this issue. Here are some steps you can take to troubleshoot the problem:
- Check the power source: Ensure that the light is receiving power by verifying that the circuit breaker or fuse connected to the light is not tripped or blown. If it is, reset the breaker or replace the fuse and see if the light functions properly.
- Inspect the bulb: The red flashing light could be an indication of a bulb issue. Remove the bulb from the fixture and inspect it for any signs of damage or a burned-out filament. Replace the bulb with a new one if necessary and see if that resolves the problem.
- Check the motion sensor settings: Some motion lights have adjustable sensitivity settings. Make sure the sensitivity setting is properly adjusted to detect motion as desired. Consult the user manual or manufacturer's instructions for your specific model to learn how to adjust the motion sensor settings.
- Reset the light: Sometimes, a simple reset can fix the issue. Turn off the power to the light at the circuit breaker or by disconnecting it from the power source. Leave it off for a few minutes, and then restore the power. This can help reset the light and clear any temporary malfunctions.
- Verify the wiring: Inspect the wiring connections for any loose or damaged wires. Ensure that the wiring is properly connected and secure. If you find any issues, consult a qualified electrician to address the wiring problem.
If none of these steps resolve the issue, it's possible that there may be a defect with the light itself. In that case, you may need to contact the manufacturer or return the light for repair or replacement, especially if it is still under warranty.
7/2/2023 5:41:16 PM •
OUTDOOR Home...
•
Answered
on Jul 02, 2023
•
166 views
My kkmoon nvr turns on but won't show camera feed on my screen
If your KKmoon NVR turns on but won't show camera feed on your screen, here are a few troubleshooting steps you can try:
- Check the cables: Make sure all cables are securely connected and that the camera is powered on.
- Check the NVR settings: Ensure that the NVR is set to display the correct camera channel. Go to the NVR's menu and look for a setting related to camera input or channel selection.
- Check the resolution: Make sure the resolution of your monitor is set correctly. If the monitor's resolution is too low, it may not be able to display the camera feed.
- Update the NVR's firmware: Outdated firmware can cause problems with the NVR's functionality. Check the KKmoon website for any available firmware updates.
- Restart the NVR and monitor: Sometimes a simple restart of the NVR and monitor can resolve the issue. Unplug both devices, wait for a few seconds, and then plug them back in.
If none of these steps resolve the issue, you may need to consult the NVR's user manual or contact the manufacturer for further assistance.
6/16/2023 10:12:10 PM •
Home Security
•
Answered
on Jun 16, 2023
•
240 views
Not finding what you are looking for?