20 Most Recent
Samsung SHR-2082 8 Channel Stand Alone Dvr with Cdrw Questions & Answers
Menu pasword
The manual says:
You cannot enter MENU by forgotten password.
- If you forget the password, you shall reset SHR-2160/2162/2080/2082 DVR to
the values set at the factory. Keep pressing both the "MODE" button and the
"PTZ" button on the left for 5 seconds, Keep pressing both the "MODE" button
and the "PTZ" button on the left for 5 seconds. The password default is "4321".
Samsung shr-1040
Best to get a USB thumb drive and download the video needed to the thumb or flash drive. Put it on the computer and there you can use a program like Snagit to capture the best parts and save it for police. Saves a lot of wasted time
Samsung shr 1040 4 channel dvr
Try this it will work:
Press and hold "ch1 and mode" buttons at the same time and hold for about 45 sec. This will change yoursetting to VGA . You can fined this info in your user manual on page # 6-13 see note at bottom of page for "HIDDEN KEY" shortcut's
It's a good system dont give up.
Admin pass word
HI
the admin password is 4321
If this does not work, you can reset the device.to the values set at the factory. Keep pressing both the "MODE" button and the
"PTZ" button on the left for 5 seconds until LED lights on in the order of
1➝2➝3➝4➝5
Then you can use the default admin password and take it from there.
Cheers
TeaCii
If you own website,
add
live support almost free
Real
security guard to watch your cctv for $1/day
Need the manual to try
here's the online manual in a vertical format...
http://www.scribd.com/doc/56426559/SHR-208X-216X-ENG
Bill
Samsung dvr shr 2082
go to samsung-security.com and type in shr-2082 to get to archived discontinued literature.
Samsung SHR-1040 Digital Video Recorder
it sound like the system is locked up or your hard drive is going bad. write down all the info on the unit and reset and reprogram the unit. this may solve your problem if not you my need to send it in for repair.
•Factory Reset Hidden Key :
Mode Key + CH 2
•The Password and all setting
value will return to the initial
default value.
•Default Password is ‘4321’ .
mj
SHR-2082 RECORDING TIME ZONE FROZEN!
David,
try setting the time to something different (Like a day and hour from the current setting) than the current time and see if that come up if so then set the system to the current time and date and check again, if that solves your problem great if not reset your system and reprogram it.
•Factory Reset Hidden Key :
Mode Key + CH 2
•The Password and all setting
value will return to the initial
default value.
•Default Password is ‘4321’ .
mj
Samsung SHR-1040 Won't Initialize
try to reset the unit and start over.
•Factory Reset Hidden Key :
Mode Key + CH 2
•The Password and all setting
value will return to the initial
default value.
•Default Password is ‘4321’ .
mj
Samsung shr-1040 playback is blocky
Sorry, but there is no way to turn off the compression. That is the just the way a quad works. It compresses the 4 video signals to 1 channel. The only way to get around it is to buy a 4 channel unit. 1 channel per camera.
Rob
I have a samsung 2082 every thank comes on but
First try,
Problem: All the front LEDs are in operation but the monitor remains black.
Solution: Video out may come out differently with the connected monitor. In short, Video
Out is set to Composite Output but connected to VGA Input Monitor or vice
versa. If the MODE and ZOOM buttons are pressed and hold for 5 seconds, the
system restarts while alarming beep sound.
Second and works 99.9% of the time but you have to reset all parameters
Factory Default will be done as follows;
- In Live mode, press and hold down MODE and then PTZ on the front panel for
6 seconds to reset all settings to factory.
Default menu password 4321
I have a samsung home
The manual says:
You cannot enter MENU by forgotten password.
- If you forget the password, you shall reset SHR-2160/2162/2080/2082 DVR to
the values set at the factory. Keep pressing both the "MODE" button and the
"PTZ" button on the left for 5 seconds, Keep pressing both the "MODE" button
and the "PTZ" button on the left for 5 seconds. The password default is "4321".
You can download the user manual here:
http://samsungsecurity.com/product/p_detail.asp?seq=94&sel_seq=64
Not finding what you are looking for?