Avic-n1 i have a avic-n1 on my car the wires are connected but it don't turn on only the little red light turns on

you must have the brain or it will not work

Hi,

Initially, pls try a reset. The reset button is recessed button a tiny hole on the face plate above the right knob.

Alternately, seek the services of third party repair, for a start, try eBay.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards. Thank you for using FixYa.

Do you try to connect the brain with it? try it..

ther should be a yellow cable and a red cable join those to the positive terminal ,and the blck cable to the nagative terminal .

light green wire for ebrake . attach to gorund.

We can fix this and all other AVIC N1 N2 N3 problems.

Please visit www.turbotunes.com for affordable AVIC repairs.

-Steve

www.pioneerelectronics.com should have listings and manuals for their products in downloadable pdf form. Also, try visiting www.avic411.com for all your Pioneer Avic series navigation needs.

It is probably the ribbon cable that you can see when the screen closes. This is a known problem and the part is sometimes hard to find. But is available.

i think you just need to set up your N1.


check with your user manual :)


Mark
ww.blueice-electronics.co.uk

You do have both parts of this unit? The Display unit and the (brain) Hide away unit. If so try resetting the unit. it is located behind a tiny hole on the face plate. Just above the right knob.