An expert who has achieved level 2 by getting 100 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 100 times.
Re: Pioneer SuperTuner III D wiring installation diagram...
Unless someone cut it off there is a black wire with a spade terminal to connect to the car chassis.
Now go to
Register, and download your manuals.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Download manual from Pioneer website. Yellow is b+, red is acc, black is chassi ground. Green, brown ,gray and white wires are color paired for speakers. Blue wire is amp remote turn on .Hope this helps
I have a 94 Ranger XLT extended cab. Here are the power/ ground connector pinouts and wire colors as shown in the factory service manual: Pin 1 LG/Y Radio Memory Power (B+) Pin 2 BK Ground Pin 3 Y/BK Power (Hot in RUN or ACCY) Pin 4 LB/R Illumination (dims with dash lights) Pin 5 O/BK Illumination (does not dim) Pin 6 BK/LG Ground
From the diagrams, looks like either ground will work.
tdohnke-So you need a wiring diagram,well lets see what we got
red-accessory-12volt key switched
white-left front speaker-positive
white with black stripe-left front speaker negative
grey-right front speaker-pos.-
grey w/black stripe-right front-neg.
green w/black stripe-left rear-neg
purple w/black stripe-right rear-neg.
blue- remote turn on
orange w/white stripe-dimmer-optional
Try out this diagram,they are pretty much all the same now,if I missed any let me know. cooltek Mar,4/08