The disc tray isn't working, it's telling me unable to read the disc when the disc isn't in the disc tray, pressing eject does nothing whether the disc is in the disc tray or not, and putting the disc in the disc tray has no effect

1) Turn on the player with no disc in the tray.
2) Open then close the tray, wait to see the No-Disc Message
in the top Left Corner.
3) Now press the REPEAT button on the remote, followed by a
five digit code. eg. 57538 if you have a region 2 player.
4) When it works a 2 (your current region) will appear in
the top left corner.
5) Press 9 to make it region less.
6) Press Eject to OPEN to open the disc tray.
7) Press Eject to CLOSE to close the disc tray.
8) Power the unit off
9) Now power the unit on again, it should now read all
regions of DVD/BD Disc.

Here is a list of all the region codes:

R1 - 29334
R2 - 57538
R3 - 56732
R4 - 76884
R5 - 53814

Hi Matt,

Here is the process for troubleshooting this specific issue:

• First remove your disc from the tray. I assume you have already done this.
• Ensure your faceplate (the front of your system) is on correctly. Sometimes these can become loose and off kilter. Press the two edges firmly with your hands and "push" it into place.
• Push the eject button. Although it hasn't worked in the past, adjusting the faceplate may correct the issue.
• If that doesn't work, move the disc tray drive gently from left to right when it is open. Again, be gentle-- what we're trying to do here is slightly adjust the disc tray in case it isn't entering your system properly.

Still not working? Time to send it to Microsoft for repair. You can find all of that information on their official support site. Click here for more details.

Hope that helps!

is there a tiny whole in your ps3? in which you could insert a small pin? if not. then the disc tray may be stuck. you could try lifting the disc tray with a pliers or something that can hold the tray and slowly pull the disc tray as you press the eject tray. Pm me for any clarifications.

1) Turn on the player with no disc in the tray
Wait till the unit is at the Samsung logo screen.
2) Open then close the tray, wait to see the No-Disc Message in the top Left Corner
3) Now press the REPEAT button on the remote, followed by a five digit code.
In this case Repeat 29334
4) When it works a 1 will appear in the top left corner
5) Press 9 to make it regionless.
6) Press Eject to OPEN to open the disc tray.
7) Press Eject to CLOSE to close the disc tray.
8) Power the unit off
9) Now power the unit on again, it should now read all regions of DVD Disc.

Enjoy

Its due to faulty Laser Lens/head. Try cleaning it by cleaning CD. If still the problem persists, contact near by service center.

Inspect the tray or door to see if there is a very small hole in it. If so, this is an 'emergency' ejection hole and a standard paper clip, unfolded, can be inserted there to manually eject the tray. This is a real common problem caused by the slippage of a clutch mechanism that is supposed to protect the tray mechanics from being damaged if the tray is somehow impeded during its travel.  It must be tougher than rocket science to properly design this feature -

Try this. This works on some brands and models.

Power up the unit. Using the remote, press and hold the 'STOP' button for about 5 seconds. Release and press the 'OK' button.

Well first of all, why the hell would you press play when there was nothing in it???

you should never use a disc thats scratched inside yiour machine its most likely your dvd machine is having trouble reading your media the best way to solve this is to unplug your machine wait turn it back on keep pressing eject it should eject dont use that dvd disc again hope this solves your problem did for me ;