R margin is not in the right place

Hold down the margin release key and turn on, machine will print test till turn off. Resets the TW, depress the left and right margin keys together will reset the margins to 10 and 75.

See the instructions on page 2 of this manual: http://www.brother-usa.com/VirData/Content/en-US/Typewriters/Consumer/UsersManual/UM_AX325_GX_6750_EN_5674.PDF

Put a shot of WD40 on both sides of the silver shaft that the carroer slides on. If that doesn't do it put some on the carier motor bearings. The front one can be reached from inside of the T/W the rear one yuo will have to remove the case of fish the straw thru it. The motor is located on the R. rear corner.

DickyO

After you press the margin release key, space to the desired R. margin location, press the R. MAR key.

DickyO

My guess would be that the left and right margins are set at the same place. Try resetting the right margin and see if that's the problem. I used to experience this a lot with kids playing with the typewriter.

I'll try, return to the margin, touch and release the mar. rel key, backspace to the place you would like the L. margin, press the L. margin key.

DickyO

From the User's Manual:

Margins and For each setting, move point. key(s) indicated:
• LMar to set left margino
• RMar to set the right margino
• MarRei to the!" left of the margino
• TSet to set a tab. Vou set at the left and right margins. Vou • TClr to clear a tab.
• TClr + CRln elear ali The earrier does not margino when the carrier is tive margino Vou type or space through ríght margino saved when the oft.
Tabs
the carrier to the desired point, and press the
the margin.
margin.
MarRel release the left margin, ther Backspace or +- to move
margi n.
You can up to 26 tabs. Permanent tabs exist
You cannot clear these tabs.
CRtn to clear all tabs.
carrier lock at the right margin. The typewriter beeps
about five spaces before the right margin. You can
the right margin. Margin and tab settings are
typewriter is turned.

You can download the User's Manual from LEXMARK:
http://images.lexmark.com/publications/pdfs/2007/index/en.html

Look for the title 'IBM Typewriters' at the end of the page, open the list box and select your typewritter model.

Hi:

On all IBM Wheelwriters the right margin can always be typed through. The only indication you will get when you reach the right margin is a beep tone. To set the right margin, space to the desired point and depress the right margin key once.

Andrew

It sounds like the left margin is set in the middle of the page, return to the stopping place, press margin release then backspace to the place where you wany the left margin and press l. margin key.

If that dosen't do it remove the batteries and unplug the machine for a minute or two all settings will go to defalt. CAUTION ALL THE MEMORY WILL BE CLEARED!!!

DickyO

Try resetting the left margin to a place near the left side