20 Most Recent
Questions & Answers
Print wheel hammer
Your problem is probably the print solenoid either not firing or the cap that is on the end of it has broken off. Usually the cap is broken and a new one can be installed in its place.
on Jan 07, 2015
Letters to close
The pitch (spacing) is set by the print wheel. 10. 12, 15 or PS.
the only way to change thr spacing is to change the print wheel.
on Feb 13, 2014
Only typing half letters and numbers
On the WheelWriter series, sometimes the platen may pop out of position, causing only half the letters to print. If this is the case, easially solved... Using the left and right platen knobs, firmly push down to lock it back in place. Hope this helps....MediaMan
on Jun 17, 2013
Not finding what you are looking for?