Xl44 GE GAS RANGE OVEN WONT WORK, RED LIGHT IN COMES ON, STOVE TOP WORK . WHAT DO I NEED TO DO

oven wont light because the igniter isn't glowing bright enough. Just replace the igniter and oven will light.

Hi,

The ignitor is not working right and is going bad....
have the repair man replace the ignitor, or DIY....
Check out this tip about your problem...

Oven not Working or Oven not Heating

Oven Problems Replacing the Igniter


heatman101



czvb

http://kitchen.manualsonline.com/manuals/mfg/ge_appliances/xl44.html
Try this link for a manual.I hope this helps ,and good luck.

Hi I Have A GE XL44 That Is Running Very Hot I Want To Know How To Troubleshoot Because When I Was Cooking Plantains I Did Burned My Fingers Because Of The Oven That Is Running Too Hot

Set the oven for the desired temperature. It will cycle on and off at that temperature.
It will lite automatically.

if this is a new stove need to change the pin in the regulator ,
then need to replace the stove top orifices from gas to l.p.
check under the stove for pieces they tape them under there by the regulator -- that how i found mine under my new jenn air
check the stove companies web site for a users manual also

it's time to replace the oven ignitor.

I have a GE Gas Stove XL44 the stove top buners don't light by themselves without manual lighting. When I turn on the buner knob the buner doesn't click. Also I used my self- cleaning oven for the first time and stopped it before the time was up after that is when the stove top buners wouldn't light by theirselves.

I have XL44 oven JGBP26. I replaced the glow ignitore on the oven but still will not glow. I carfully tested the current to the ignitore and showed 125 volts, I also tested the resistance on the control valve lead and to ignitore and showed 1100.

Hi I have a GE X44 gas stove. The 4 top burners work just fine, but the oven no longer turns on. I don't see the blue flame inside the oven. Is it safe to relight the pilot light?????