JVC HD-52Z575, when it comes on it's fine for a short period of time. Then the image flickers. The main image stays intact, but a second red 'ghost' image appears slightly to the right of the main image. Then slowly the entire picture begins to turn red until the screen is washed out in red.
The solution is an easy fix. Ignore anyone telling you to take it to a service center or to replace the convergence driver. You need to access the service menu on your television by using your remote control: DRIVE CONVERGENCE Adjustment (Using remote control) •Use
the inner RGB box pattern. (1)Set
the [SLEEP TIMER] key to 0 min. (2)Press
the [DISPLAY] key and the [VIDEO STATUS]key simultaneously. (3)Press
the [9] key to display the RGB box pattern. (4)Select
the R mode by pressing the [DISPLAY] key. (5)Adjust
the R mode to setting as same as G mode bypressing the [CH ]+ / [CH -] key. (6)Select
the B mode pressing by the [DISPLAY] key. (7)Adjust
the B mode to setting as same as G mode bypressing the [VOL] - / [VOL +] key. (8)Check
to see that the cross pattern is white. If thecross pattern is not white,
readjust (5) to (6). That's it, your color is now corrected. Yes, I know...your welcome.
SOURCE: JVC HD-52Z575
You both need to have a service center come out and reset the TV using the reset jig. This will correct the reverse image problem.
352 views
Usually answered in minutes!
×