- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
u need to enter with username: supervisor and the password : empty.
after that go to configuration and make note do the administrator 1 is for everything in charge. from here you can change the admin password and remember it. the admin username. then logout and login with the. remembered username and the password your recent change. there for you can do anything. if this do not work. than download the NV ram data on an SD card and the content send me to email.. for additional info if you do not have some specific knowleague about this ask more questions...
If you mean the wireless pass code or Passphrase you need to log onto your modems web page which normally sits at IP address: 192.168.100.1. In the wireless section there is the pass code update field.
the default username and password for netgear router is admin and password
if in case you have change the username or password and you dont remember what it is just press the reset button at the back of the router for 5 sec, careful though cause this will also delete all the info that you have input in the router the first time such as isp info this will cause disconnection from the internet, but as soon as you know those info you can go ahaead and do this. this will also reset the username and pass of the wifi connection.
Hello You can do a factory reset. 1 unplug all cables to router. 2 Hold down small reset button behind router,use a pen tip to hold this button in for 30 seconds. 3 Reconnect cables,power cable first. 4 Log into router using default password and username.Which should be......
username=admin password=password or admin Once loged in you can reset your username and password to what you want.
When you first setup your facebook account, you actually had to setup your Username and Password. In case you forgot your Username or password, you can always click on "I Forgot My Password" and an email will be sent to the email address you used to register on facebook containing both the username and password.
Go ahead, click on "I Forgot My Password" and fillout the form, check your email and try logging on to facebook.
Did you try start the PC in safe mode & Administrator? Restart your PC, press F8 , Select safe mode with networking prompt, Open the user Administrator, Go to control panel> Users> select the user > change password for it.
Open the web browser and type 192.168.1.254 in the browser’s
address box. this number is the default IP address for this router.
A username and password window will appear. username and pass should be admin.
If you change the password and dont remember it. Look for a restart button on the back of the router. This will reset it back to default.
When you manage to login look for WAN and WEP setings
Do you mean password? Your post is difficult to understand because of the lack of punctuations and capital letters. Remember, all we know is what you post, so try to be more legible. Try resetting your router to defaults.
×