My Kodak Easy Share is printing my documents great but it is adding blue lines across it as well. When it is done it looks like it was printed on notebook paper? How can I fix this?

Your sensor is failing.

Check the version of AiO software you are using. We had to re-install the Aio Kodak software yesterday because the print que did not register when I changed the ink cartridges. The AiO would scan, but the computer side still thought it was out of ink.

Perhaps the latest software will fix your problem too.

Juliasew

Bad new catridge not impossible, I would return the catridge to the store.

Try this one, Turn on the printer, Take out the inks, remove the printhead, put back the printhead make sure it will snap and you hear a click, put the inks back, wait for the printer to initialize, Press the Menu button, look for Calibrate printer, then print calibration page, then scan it after. Load a regular paper. Then try to print a demo page by pressing Photo and Copy at the same for 5 seconds then let it go. If same problem persist call this no for further assistance 1800 421 6699
Thanks

sounds like dried cartridge

Check your settings in the print window that comes up when you start a print job. You probably have "Print colors as black" selected. Unselect it.

Do not try to clean print head again and again, it consumes too much of ink.
Try reseting print head and then calibrate it.   after then check nozzles and align prinhead.   Now u can try cleaning printhead last time.
If it does not fix your issue , your printer needs to be replaced  (In case printhead has already replaced within 30 days)
MS

keeps giving me message "printing error" (prints ok from camera) i have probably messed up every setting by now

ok..try the test page see if that works.

then do a head calibration page.

if you need more help, click here

http://tinyurl.com/6qcpgy

We had the USB port in upside down on the printer (go figure)! Once we reversed the USB cord and updated the software using the Kodak trouble shooting site,my computer added the new printer.

But we were still unable to print from the Kodak easy share, but were able to print from Adobe Photo shop.

Thanks for responding.

Al