20 Most Recent Kodak EASYSHARE G610 Thermal Printer Questions & Answers

Probably a piece of the old one is obstring it.

Kodak EASYSHARE... | Answered on Dec 25, 2017

Consult the Kodak company or Go to a nearby gadget technicians. I hope it could help you....

Kodak EASYSHARE... | Answered on May 13, 2017

It sounds funny but I have seen this so try it.Have you removed the protective strip on the contacts of the cartridge? the bare contacts must touch the printers.If I didn't see this happen I would not post it,it does.Many people in a rush to install make this mistake.Good Luck.

Kodak EASYSHARE... | Answered on Feb 19, 2013

printer doesnot print

Kodak EASYSHARE... | Answered on Sep 19, 2011

Are you using a thermal paper when printing? If you are, then this most probably a problem printer head problem.
hope this helps.

Kodak EASYSHARE... | Answered on Jul 15, 2011

Hold the transfer button down then hold the left arrow. Make sure the printer is on. Should here some clicking noise. When it completes then remove the ink cartridge.

Kodak EASYSHARE... | Answered on Nov 12, 2010

reinstall its drivers if it doesn't work then tell me i will tell you another solution thank you for your queston.

Kodak EASYSHARE... | Answered on Aug 19, 2010

the dock will not pick up paper lost my manual i tried one piece half full tray and afull tray it worked last time i printed what up
it keeps saing its out of paper

Kodak EASYSHARE... | Answered on Jul 20, 2010

Have you tried cleaning the print heads? The printer should have a function to do this...consult your manual would be my best guess

Kodak EASYSHARE... | Answered on Apr 16, 2010

ok! just make sure that you restart your printer and your computer to make sure that your drivers are recognizing your pc unit or laptop once thats done make sure that you do a test page on your printer and once that done make sure that the drivers work from your port on your printer try that and the hit me back..

Kodak EASYSHARE... | Answered on Mar 26, 2010

Had same prob with G600, all i had to do to get it working again was to clean the rollers with a damp cloth to get it working again.

Kodak EASYSHARE... | Answered on Dec 14, 2009

A lot of times you need to do more than clean sensors to get results. You are getting yellow and pink because either soe colours (blue & black) are dried at the nuzzle or finished.

The procedure am giving you below will determine which is the case.

Ink may be new, but their nuzzles may be blocked; depending on manner of storage. To be sure apply a folded tissue paper to the ink nuzzle and press firmly. If the tissue comes off well blotted with ink it means you still have a good amount of ink in it the nuzzle is not blocked. If not blotted or scantily blotted, it means ink is really low or nuzzle is blocked. To be very sure of this, place nuzzle in a plate/saucer with a bit water so that the nuzzle is soaked. Leave for about 10 minutes. Then apply the tissue again. If still not well blotted it means ink is really low or empty. If new you should return it for a replacement. In the case of blocked nuzzles, the procedure may be repeated over to get results.

Kodak EASYSHARE... | Answered on Dec 08, 2009

Replace the colour cartridge,
or use Windows to configure your printer to print "black only".

Kodak EASYSHARE... | Answered on Dec 08, 2009

Not finding what you are looking for?
Kodak EASYSHARE G610 Thermal Printer Logo

Popular Tags

65 questions posted

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Cindy Wells

Level 3 Expert

6136 Answers


Level 3 Expert

2239 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

EasyShare Kodak

  • EasyShare Kodak

Most Popular Question

printer will not pull photo paper

  • Office Equipment & Supplies