Printing pictures on Kodak Printer dock G610 from Kodak Easy Share on the computer
When I select a picture out of Kodak easy share on the computer to print out on the G610 Kodak printer dock and press print in a matter of seconds an error message comes up
when i try to print a picture, the image is showing on the camera, but when it prints, only the bottom half of the picture prints, I changed the paper and the film cartridge but it does not help!! when i try to print a picture, the image is showing on the camera, but when it prints, only the bottom half of the picture prints, I changed the paper and the film cartridge but it does not help!!
AnonymousApr 17, 2009
I also have the same problem. It will say device not connected.I also have the same problem. It will say device not connected.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi Friend, Do you know that behind every problem, there is always a solution. So therefore, I have quick, easy and real solutions to your Printer Problem. Just click here for you Solutions.
It is not possible to email directly from the camera.
If you're experiencing emailing difficulties directly from the Easy Share Software:
Please do a Clean Install on the software:
Please follow the instructions:
Uninstall Easy Share software:
Select Start > Settings > Control Panel > Add / Remove Programs. For Windows XP operating systems, select Start > Control Panel > Add / Remove Programs.
Select Kodak Easy Share software.
Select Remove (or select Change, and then select Remove).
Run the Clear utility:
Visit the CLEAR Utility for Kodak Easy Share software Web page at www.kodak.com/go/clear
Click the Download button, and then follow the on-screen prompts.
After restarting your computer, visit the Kodak Easy Share software Web page at www.kodak.com/go/easysharesw and install the latest version of Easy Share software.
You have to go to printers & faxes on your "start" button on your computer screen. And click properties on your printer. And fix the alignment size of picture printing. Or your out of ink.
Go to Start/Control Panel/ Add remove software. Remove the Kodak Easy share software.
Do not re install it.
Use USB cable to connect camera to computer Use alternative software [picasa which is Free] or any other image editor for processing and printing images. It is likely your printer has supplied software that is suitable.
Not sure if this will help, but you might try removing the batteries from camera, then see if it responds on the dock, if so it is most likely bad battery. That battery should be easy enough to find at locally.
You might wanna try the Interactive Troubleshooter on Kodak's site. http://www.kodak.com/global/en/service/products/ekn030483.jhtml?pq-path=6861
when i try to print a picture, the image is showing on the camera, but when it prints, only the bottom half of the picture prints, I changed the paper and the film cartridge but it does not help!!
I also have the same problem. It will say device not connected.
×