HP Problem Blicking lights, not printing and not working

can you give me the exact sequence of beeps? ex: 1 beep, 3 beeps

some times due to static it stops working.

Do have the power light on or blicking (IF yes then do the following)

unplug all the cable including the power cable

press and hold the power button for 30 seconds

reconect all the cables and then try switching it on

printer c3188 not working light are blicking

replace ink.

cancel print from properties

if the sound is working you need to replace the lamp and reset the lamp use hours.

You need a new pad and you need to reset your code.
Codes are dependent on your model.

You can get more info here:
http://www.fixyourownprinter.com/forums/inkjet/32258

I replaced the flyback transformer and horizontal output transistor and works great.

Blicking lights, not printing and not working

Make sure you have full printer cartridges. If this does not work. Turn off the printer and unplug it. Then try to plug it back in and turn it on. This will probably make the problem go away.